Showing 1–16 of 82 results
-
ADVANCE CAR JACK CONTROLLED BY RF WIRELESS DEVICE
₹14,000.00₹9,200.00The project is designed to control the direction of car jack by using a RF technology for remote operation with a transmitter and receiver. The direction of the DC motor is depending on signal which is coming from transmitter. Hence, if the relay 1 & relay 4 gets ON then the motor rotates in forward direction. And if relay 2 & relay 3 gets ON then the motor rotates in backward direction.
-
ANDROID BASED NOTICE BOARD
₹8,500.00₹5,600.00Notice Board is primary thing in any institution / organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is quite a difficult process. A separate person is required to take care of this notices display. This project deals about an advanced hi-tech wireless notice board.
-
ANDROID CONTROLLED CAR JACK
₹12,500.00₹10,500.00The project is designed to control the direction of car jack by using an android phone with the help of Bluetooth device. The direction of the DC motor is depending on the signal which is coming from mobile. Hence, if we press UP, this is present on your mobile then the relay 1 & relay 4 gets ON, so the motor rotates in forward direction. And if when we press DOWN from mobile the relay 2 & relay 3 gets ON then the motor rotates in backward direction.
-
ANDROID CONTROLLED HOME APPLIANCES
₹9,000.00₹6,000.00The main objective of this project is to develop a home automation system with Android application controlled remote.The microcontroller used here is of 8051 family. The loads are interfaced to the microcontroller using Opto-isolators and TRIAC’s.
-
ANDROID CONTROLLED ROBOT
₹7,000.00₹5,400.00The project is designed to control the ROBOT by using a Android technology for remote operation using an transmitter as smart phone and receiver as Bluetooth device. The direction of the DC motor is directly proportional to the voltage applied across its terminals.
-
AUTO POWER SUPPLY CONTROL FROM 4 DIFFERENT SOURCES
₹8,800.00₹6,500.00The main objective of this project is to provide uninterrupted power supply to a load, by selecting the supply source automatically from any available one out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problem in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.
-
AUTO SELECTION OF ANY AVAILABLE PHASE, IN 3 PHASE SUPPLY SYSTEM
₹7,400.00₹6,400.00The project is designed to provide uninterrupted AC mains supply i.e., 230 volt to a single phase load. This is achieved by automatic changeover of the load from the missing phase to the next available phase in a 3 phase system.
-
AUTOMATIC CONVEYER BELT FOR WATER FILLING
₹12,300.00₹9,800.00The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
-
Automatic Load Sharing By Parallel Transformer
₹7,500.00₹6,200.00Transformer is basically a static device which transfers the electrical power from one circuit to another circuit with desired change in voltage and current at constant frequency. It is only one device which operates at highest efficiency at full load condition. But abnormal condition occurs at overloading condition which may result in severe problem in future.
-
AUTOMATIC POWER FACTOR COMPENSATION FOR INDUSTRIAL POWER USE TO MINIMIZE PENALTY
₹8,700.00₹7,700.00The project is designed to minimize penalty for industrial units using automatic power factor correction unit. The micro-controller used in this project belongs to 8051 family. In this proposed system, two zero crossing detectors are used for detecting zero crossing of voltage and current.
-
Automatic Train Traffic Gate Control
₹8,400.00₹7,400.00Automatic Railway Gate Control System is a simple but very useful project, which help is automatically opening and closing the railway gate upon detecting arrival or departure of the train.In general, Railway gates are opened or closed manually by a gate keeper. The information about arrival of train for opening or closing of door is received from nearby station. But some railway crossings are totally unmanned and many railway accidents occur at these unmanned level crossings.
-
DC MOTOR SPEED CONTROL
₹8,000.00₹5,200.00The project is designed to control the speed of a DC motor using an 8051 series microcontroller. The speed of DC motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied.
