PLC BASED CHEMICAL MIXTURE

All Projects

Showing 209–224 of 364 results

  • 4.00 out of 5

    PLC BASED CHEMICAL MIXTURE

    22,500.00 18,500.00

    The main aim of the project is to process the real time acquisition under programmable logic control for large scale remote industrial environment.

    Select options
  • 4.56 out of 5

    Power Generation Using Piezoelectric Sensor

    9,200.00 8,200.00

    Day by day, the population of the country is increasing and the requirement of the power is also increasing. At the same time the wastage of energy is also increasing in many ways. So, reforming this energy back to usable form is the major solution. In this footstep power generation project, we are generating power with the help of human’s footsteps; this power is then used to charge battery. The power is stored in a battery that can be used to charge. This system is powered by Atmega 328, it consists of Arduino IDE, RFID sensor, USB cable and LCD. When we power on the system, the system enters into registration mode.

    Select options
  • 4.50 out of 5

    Power Status Indication Over GSM

    9,500.00 7,000.00

    In this project, an automatic reclose circuit breaker for low voltage usage is designed. The product description is the Auto Reclose Circuit Breaker (ARCB) will trip if the current sensor detects high current which exceeds the rated current for the miniature circuit breaker (MCB) used. Then the fault condition will be cleared automatically and return the power line to normal condition.

    Select options
  • 4.67 out of 5

    Prepaid Energy Meter

    15,000.00 14,000.00

    The concept of electronic energy meters has been introduced in the power sector to effectively record the units consumed for billing purposes and also monitor several other factors to reduce power theft and minimize losses that occur due to conventional electromechanical energy meters. This is a multipurpose project that integrates all the functions including a prepaid billing arrangement and automatic message sending system to the utility company. It may please be noted that it is truly not ausable commercial product engaging actual prepaid card but uses a set of switches for understanding the technology implemented behind it. This project uses an Arduino to which a GSM modem is interfaced. From here the message is sent to the phone number that is auto-saved by giving a missed call to the SIM number present in the GSM modem. There are a set of pushbuttons, which are used to load,any recharge amount required. Such arrangement is in lieu of an actual prepaid card for demo purposes. By pushing those buttons one can easily recharge the amount. As soon as the Arduino receives any recharge amount, a switch is set, to deliver power to the load. Thereafter consumption of the load power is calculated by the energy meter, which is interfaced to the Arduino through an Optical Isolator IC. The Arduino program then starts to deduct the recharge amount as per the consumption of load power. Once the recharge amount reaches zero then the Arduino cuts the power supply to the load through a relay driven duly by an NPN transistor and also sends a message to the phone number stored that contains all the billing information. Then again the balance is not available then go to the message in the gsm no available in balance

     

    Select options
  • 4.67 out of 5

    PREPAID ENERGY METER WITH GSM INTERFACE

    9,500.00 8,400.00

    The concept of electronic energy meters has been introduced in the power sector to effectively record the units consumed for billing purposes and also monitor several other factors to reduce power theft and minimize losses that occurs due to conventional electromechanical energy meters. This is a multipurpose project that integrates all the functions including a prepaid billing arrangement and automatic message sending system to the utility company.It may please be noted that it is truly not ausable commercial product engaging actual prepaid card but uses a set of switches for understanding the technology implemented behind it.

    Select options
  • 4.17 out of 5

    PRIORITY BASED SUPPLY SELECTION OVER GSM

    8,500.00 6,800.00

     

    The main objective of this project is to provide priority-wise power supply to a load, by selecting the supply source from any available one out of 4 such as mains, generator, inverter, and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problems in various areas like industries, hospitals, and houses. An alternative arrangement for a power source is thus desirable.

    Select options
  • 5.00 out of 5

    PRIORITY BASED SUPPLY SELECTION USING ARDUINO

    8,300.00 5,500.00

    The main objective of this project is to provide priority wise power supply to a load, by selecting the supply source from any available one out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problems in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.

    Select options
  • 4.50 out of 5

    PRIORITY BASED SUPPLY SELECTION USING PIC MICRO-CONTROLLER

    6,200.00 5,200.00
    Select options
  • 4.50 out of 5

    PROGRAMMABLE ENERGY METER FOR ELECTRICAL LOAD SURVEY

    8,400.00 7,100.00

    The main objective of this project is to calculate the electrical energy required by a load through push-button switches by entering the unit cost relation as per the energy tariff. With this system, one can avoid hours of waiting for a load survey assistant.

    Select options
  • 4.60 out of 5

    PURE SINE WAVE INVERTER

    9,800.00 7,800.00

    The aim of this project is to design and implement a single phase inverter which can convert DC voltage to AC voltage at high efficiency and low cost.

    Select options
  • 4.63 out of 5

    RAILWAY TRACK CRACK DETECTION

    11,000.00 9,400.00
    Select options
  • 4.20 out of 5

    Railway Track Crack Detection

    12,200.00 11,200.00

    India has the world’s fourth largest railway networks, which carry out most of the commercial transport in India. The train transportation increased due to high speed, economical, environment friendly, safety and modern characteristics of railway system. Major problem with this transportation is the bad weather condition, which cause flaws and cracks leads to the damage of railway tracks.

    Select options
  • 4.00 out of 5

    Rain Alert System

    3,000.00 1,850.00

    The project is designed to develop an automatic rain alert system that switches a siren on or off upon sensing the rain. In some field use of proper method of rain alert system is important. The advantage of using this method is to reduce human intervention.

    Select options
  • 4.50 out of 5

    RAIN SENSING ALERT SYSTEM

    3,200.00 2,400.00

    The project is designed to develop an automatic rain alert system that switches a siren on or off upon sensing the rain. In some field use of proper method of rain alert system is important. The advantage of using this method is to reduce human intervention.

    Select options
  • 5.00 out of 5

    RASPBERRY PI FOR BLIND READER

    19,500.00 18,300.00

    This project has been built around Raspberry Pi processor board. Optical Character Recognition or OCR is implemented in this project to recognize characters which are then read out by the system through a speaker. It is controlling the peripherals like Camera, speaker and LCD which act as an interface between the system and the user. As shown in the project setup, the camera is mounted on a stand in such a position that if a paper is placed in between the area marked by angular braces, it captures a full view of the paper into the system. When the camera takes the snapshot of the paper, it is ensured that there is a good lighting condition.

    Select options
  • 4.60 out of 5

    Real Time Rf Controlled Car Jack

    23,000.00 22,000.00

    The project is designed to control the direction of car jack by using a RF technology for remote control operation. The direction of the car jack is depending on signal which is coming from remote control . Hence, if the relay1 gets ON then then car jack in up direction.

    Select options

Select your currency
×