ADVANCE GREEN HOUSE WITHOUT MICROCONTROLLER

Temprature Based Projects

Showing 1–16 of 20 results

  • 3.00 out of 5

    ADVANCE GREEN HOUSE WITHOUT MICROCONTROLLER

    7,100.00 5,800.00

    This project is designed to monitor the green house using Comparator IC. Various sensors are used to monitor the system. The sensors used are Rain sensor, Soil moisture sensor, LDR, wired security sensor, water level indicator, IR sensor. When the soil of the green house becomes dry the pump will turn on through which the water is let into the soil and the soil regains its moisture. While supplying the water to the dry soil the water level in tank will be reducing simultaneously which will be indicated by the LED’s.
    So when the water level reduces below the threshold level the pump will off automatically to avoid dry run.

    Select options
  • 5.00 out of 5

    ADVANCED GREEN HOUSE OVER GSM

    8,900.00 6,400.00

    The project is designed to develop an advanced green house system that shows sensing the moisture content of the soil. In the field of agriculture, Gas level, humidity and temperature send to user. Depend on that user will take action like “motor on” and “motor off” use of proper method of irrigation is important. The advantage of using this method is to reduce human intervention and still ensure proper irrigation.

    Select options
  • 5.00 out of 5

    GSM & GPS BASED SOLDIER TRACKING & HEALTH MONITORING SYSTEM

    17,800.00 14,000.00

    Army is one of the most important aspects of any country. It is our duty to equip soldier with better advanced technology. In this proposed system, we are monitoring the soldier’s health parameters such as heart beat rate and body temperature continuously measured and transmitted wirelessly to the control room using GSM and also the exact location through GPS.
    Here we are using voltage regulator circuit for power supply, Blood pressure & heartbeat sensor, MQ-7 sensor, temperature sensor, Wi-Fi module, GSM, GPS, buzzer and LCD display these are also the hardware parts of this projects. By using temperature sensor we can monitor the soldier’s body temperature. If smoke is detected due to fire air it is detected by using MQ-7 sensor. With the help of heartbeat & blood pressure sensor we can read the heartbeat & B.P respectively.

    Select options
  • 4.00 out of 5

    HEALTH MONITORING OF PATIENT OVER IOT

    18,700.00 14,000.00

    In this proposed system, we are monitoring the patient’s health by using arduino board & sensors. Here we are using adapter for power supply even you can use 2 amp transformer. Blood pressure & heartbeat sensor, MQ-7 sensor, temperature sensor, Wi-Fi module, buzzer and LCD display these are also the hardware parts of this projects. By using temperature sensor we can monitor the patient’s temperature. For monitoring the air quality of the room we are using MQ-7 sensor. With the help of heartbeat & blood pressure sensor we can read the heartbeat & B.P respectively.

    Select options
  • 0 out of 5

    INDUCTION MOTOR SPEED CONTROL AND DATA MONITORING OVER IOT

    17,400.00 15,000.00

     

    In this project we give a special idea of industrial automation, and fault monitoring. Induction motors are the nerves of many industries. Hence industrial automation is required for precise and accurate operation. The project Arduino-based parameter monitoring system for induction motor proposes a control and monitoring system for induction motor based on Arduino communication protocol for safe and economic data communication in industrial fields. The current, voltage, and temperature of the induction motors are very important parameters for its control system. The performance of an induction motor is directly affected by these fundamental quantities.

    Select options
  • 3.00 out of 5

    IOT BASED HOME AUTOMATION USING BLYNK

    9,900.00 7,800.00
    Select options
  • 0 out of 5

    Solar Power Vaccine Storage Refrigerator

    11,000.00 9,500.00

    Large areas of many developing countries have no grid electricity. This is a serious challenge that threatens the continuity of the vaccine cold chain. The main alternatives to electrically powered refrigerators available for many years—kerosene- and gas-driven refrigerators—are plagued by problems with gas supply interruptions, low efficiency, poor temperature control, and frequent maintenance needs. There are currently no kerosene- or gas-driven refrigerators that qualify under the minimum standards established by the World Health Organization (WHO) Performance, Quality, and Safety (PQS) system.

    Select options
  • 4.00 out of 5

    SUBSTATION MONITORING OVER GSM WITH FLOOD AND EARTH QUICK DETECTION

    8,000.00 6,800.00
    Select options
  • 4.00 out of 5

    SUBSTATION MONITORING USING ARDUINO OVER GSM

    7,500.00 6,400.00
    Select options
  • 4.00 out of 5

    Temperature controlled load

    3,800.00 3,000.00

    This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn’t require human involvement for monitoring the temperature of the load.

    Select options
  • 5.00 out of 5

    TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO

    15,800.00 14,000.00

    The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.

    Select options
  • 4.00 out of 5

    Transformer Health Monitoring

    6,000.00 4,500.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.

    Select options
  • 0 out of 5

    Transformer Health Monitoring

    6,800.00 4,800.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature , Less Oil etc.

    Select options
  • 0 out of 5

    Transformer Health Monitoring Over GSM

    7,800.00 7,100.00

    This project is about design and implementation of a mobile embedded system to monitor and record key parameters of a distribution transformer like load currents, Voltage and ambient temperature. The idea of on-line monitoring system integrates a Global Service Mobile (GSM) Modem, with a standalone Arduino and different sensors. The obtained parameters are processed and recorded in the system memory.

    Select options
  • 4.00 out of 5

    Transformer Health Monitoring over IOT

    9,300.00 7,700.00

    A recent huge interest in Machine to Machine communication is known as the Internet of Things (IoT), to allow the possibility for autonomous devices to use Internet for exchanging the data. This work presents design and execution of real time monitoring and fault detection of transformer and record key operation indicators of a dispersion transformer like load , fire, gas, Oil level,  transformer temperature and humidity. They have to look at it continuously. By using this project it can minimize working efforts and improve accuracy, stability, efficiency.

    Select options

Select your currency