TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO

Electronic Products

Showing 161–176 of 185 results

  • 4.80 out of 5

    TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO

    15,800.00 14,000.00

    The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.

    Select options
  • 5.00 out of 5

    TRAFFIC DENSITY SENSED SIGNAL LIGHT SYSTEM

    7,200.00 6,200.00

    The main goal of this project is to control the traffic density at the junction by IR sensor that detects the traffic density at the junction and changes the signal timings automatically by IR interruption method.

    Select options
  • 4.80 out of 5

    TRAFFIC LIGHT PRIORITY CONTROL FOR EMERGENCY VAHICLE

    10,400.00 9,200.00

    Traffic congestion and transportation delay on urban requirements are increasing worldwide. Traffic signal is the significant issue to control traffic lights in vehicle systems. To improve the safety for both pedestrians and the vehicles Traffic signal is must. Emergency vehicles, like Ambulance have responsibility to reach patients or those who are met with accidents have to quickly transfer them to hospital. Due to traffic signals they may be delayed for rescue operations. define how traffic signal lights will detect emergency vehicles, how to manipulate the traffic light and how to provide free way to emergency vehicle.

    Select options
  • 4.67 out of 5

    Transformer Health Monitoring Over Iot And GSM

    14,000.00 11,500.00

    This project is about design and implementation of a mobile embedded system to monitor and record key parameters of a distribution transformer like load currents, Voltage and ambient temperature.

    Select options
  • 4.33 out of 5

    Transformer Health Monitoring

    7,350.00 6,350.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.

    Select options
  • 5.00 out of 5

    Transformer Health Monitoring

    10,000.00 5,700.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature , Less Oil etc.

    Select options
  • 4.47 out of 5

    Transformer Health Monitoring Over GSM

    9,400.00 8,400.00

    This project is about design and implementation of a mobile embedded system to monitor and record key parameters of a distribution transformer like load currents, Voltage and ambient temperature. The idea of on-line monitoring system integrates a Global Service Mobile (GSM) Modem, with a standalone Arduino and different sensors. The obtained parameters are processed and recorded in the system memory.

    Select options
  • 4.52 out of 5

    Transformer Health Monitoring over IOT

    9,900.00 8,900.00

    A recent huge interest in Machine to Machine communication is known as the Internet of Things (IoT), to allow the possibility for autonomous devices to use Internet for exchanging the data. This work presents design and execution of real time monitoring and fault detection of transformer and record key operation indicators of a dispersion transformer like load , fire, gas, Oil level,  transformer temperature and humidity. They have to look at it continuously. By using this project it can minimize working efforts and improve accuracy, stability, efficiency.

    Select options
  • 4.67 out of 5

    Transformer Health Monitoring Using Arduino

    10,500.00 7,200.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.

    Select options
  • 5.00 out of 5

    Transformer Health Monitoring Using Arduino and GSM

    9,800.00 7,400.00

    This project is about design and implementation of a mobile embedded system to monitor and record key parameters of a distribution transformer like load currents, Voltage and ambient temperature. The idea of on-line monitoring system integrates a Global Service Mobile (GSM) Modem, with a standalone Arduino and different sensors. The obtained parameters are processed and recorded in the system memory.

    Select options
  • 5.00 out of 5

    Transformer Health Monitoring Using GSM

    10,500.00 6,800.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. Current systems can provide information about the state of a transformer, but are either offline or very expensive to implement. This project objective is to develop low cost solution for monitoring health condition of remotely located distribution transformers using GSM technology to preent premature failure of distribution transformers and improving reliability of services to the customers. An Embedded based hardware design is developed to acquire data from electrical sensing system. It consists of a sensing system, signal conditioning electronic circuits, advanced embedded hardware for middle level computing, a powerful computer network for further transmission of data to various places.

    Select options
  • 5.00 out of 5

    TRANSFORMER HEALTH MONITORING USING LORA COMMUNICATION

    13,000.00 11,800.00

    This presents a new Lora communication framework for condition monitoring and controlling of larger number of distribution transformers as they are one of the influential and important equipment in the power distribution network. Great numbers of distribution transformers are required to distribute power over a wide area. That being the case, it is essential to keep an eye on its condition for satisfactory operation of any distribution network. This paper presents a method of implementing Lora (Long-range) technology for monitoring and diagnosing the condition of distribution transformers using specified sensors/devices.

    Select options
  • 4.00 out of 5

    U TURN ACCIDENT AVOIDANCE USING ARDUINO

    8,500.00 7,200.00

    The constantly growing transport sector has resulted in an increase in accidents every day. The accident mainly occurs due to our carelessness and breaking of traffic rules.

    Select options
  • 5.00 out of 5

    ULTRASONIC BASE LIQUID LEVEL MEASURMENT

    6,500.00 5,800.00

    This report details the implementation of liquid level measurement system using ultrasonic waves. As the human ear audible range is in between 20 Hz to 20 kHz, it is insensitive to ultrasonic waves that falls beyond that range, and hence, the ultrasound waves can be used for applications in industries or vehicles without hindering human activity. They are widely used as range meters and proximity detectors in industries and also in the parking assistance systems.

    Select options
  • 4.40 out of 5

    UNDERGROUND CABLE FAULT DETECTION OVER IOT AND GSM

    13,000.00 12,000.00

    The main aim of this project is to find the accurate and specific location of the fault that occurs in the underground cable with the help of an IoT device and GSM by send in sms by using the Arduino uno controller kit.

    Select options
  • 4.67 out of 5

    UNDERGROUND LINE TO GROUND AND OPEN CABLE FAULT DETECTION

    9,000.00 6,200.00

    To determine the LINE TO GROUND AND OPEN LINE FAULT DISTANCE LOCATOR IN UNDERGROUND OR OVERLINE CABLE FAULT from base station in kilometers USING AN Arduino board. The underground cable system is a common practice followed in many urban areas. While a fault occurs for some reason, at that time the repairing process related to that particular cable is difficult due to not knowing the exact location of the cable fault. The proposed system is to find the exact location of the fault.

    Select options

Select your currency
×