Shopping cart is empty!
All Projects, MQ-7 Based Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Micro Controller, Mini Project, School project, Electronic Products
SMOKE DETECTOR
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
SMOOTH OR SOFT START OF SINGLE PHASE INDUCTION MOTOR
4.6 ★
4.6 ★
30 Ratings
5 ★
17
4 ★
13
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
Highlights:
The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
All Projects, Electrical Projects, Core Electrical Projects, Power Electronics, Embedded Projects, Micro Controller, Mini Project
SOFT START OF INDUCTION MOTOR USING ACPWM
4.7 ★
4.7 ★
30 Ratings
5 ★
20
4 ★
10
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
Highlights:
This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
Soft Start of Three Phase Induction Motor
4.3 ★
4.3 ★
13 Ratings
5 ★
4
4 ★
9
3 ★
0
2 ★
0
1 ★
0
(13)
Highlights:
The project is designed to provide a soft and smooth start to a 3 phase induction motor. The three phase induction motor during the initial starting condition draws up much higher current than its capacity and the motor instantly reaches the full speed. This results in a mechanical jerk and high electrical stress on the windings of the motor.
Highlights:
The project is designed to provide a soft and smooth start to a 3 phase induction motor. The three phase induction motor during the initial starting condition draws up much higher current than its capacity and the motor instantly reaches the full speed. This results in a mechanical jerk and high electrical stress on the windings of the motor.
All Projects, Soil Moisture Sensor Based Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, GSM Based Projects
SOIL MOISTURE BASED AUTO IRRIGATION WITH MANUAL CONTROL BY GSM
4 ★
4 ★
2 Ratings
5 ★
0
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(2)
All Projects, Arduino Projects, Soil Moisture Sensor Based Projects, Core Electronics Projects, Electrical Projects, Electronic Products
Soil Nutrient Monitoring Over IOT
4.8 ★
4.8 ★
5 Ratings
5 ★
4
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
Agriculture, the backbone of our country nowadays is facing a number of challenges. Our system is designed to provide a solution that is one step forward toward agricultural growth. Using IoT, an attempt is made to automate irrigation. Farmers face some difficulties in switching on/off the motor. Any delay in watering may reduce production. In this context, we propose an ???IoT Based Soil Analysis and Irrigation System??? to help the farmer in reducing human effort and increasing the yield. The farmer can control the power of the motor even at distance.
The proposed system is used to determine the nutrient quantity of soil. As we know all the nutrients are present in the soil but what amount of nutrients are available in that particular field we can??? figure out. For this project, we can use the test bench to recognize the type of soil that is good to grow the crop. On the basis of the study, it is concluded that there are 3 types of soil available and they are all uveal soil, red soil, and black soil.Everysoilhasdifferentmicronutrient.Buttomeasuretheamountofnutrientavailableinthesoilwearegoingtodesigndeviceorinstrumentwhichgivesusproperreading of micronutrient. Followingarethemainobjectives oftheproposedsystem
- Design and develop an Arduino-based sensor interfacing for reading soil parameters.
- Buildainterfacebetween LCDandmicrocontrollerto showthesensorreadings
- Convertingthesensor value usingADCport of Arduino.
- Establishing the cloud server connectivity in order to store all soil test records over the server with time and GPS location stamps.
Highlights:
Agriculture, the backbone of our country nowadays is facing a number of challenges. Our system is designed to provide a solution that is one step forward toward agricultural growth. Using IoT, an attempt is made to automate irrigation. Farmers face some difficulties in switching on/off the motor. Any delay in watering may reduce production. In this context, we propose an ???IoT Based Soil Analysis and Irrigation System??? to help the farmer in reducing human effort and increasing the yield. The farmer can control the power of the motor even at distance.
The proposed system is used to determine the nutrient quantity of soil. As we know all the nutrients are present in the soil but what amount of nutrients are available in that particular field we can??? figure out. For this project, we can use the test bench to recognize the type of soil that is good to grow the crop. On the basis of the study, it is concluded that there are 3 types of soil available and they are all uveal soil, red soil, and black soil.Everysoilhasdifferentmicronutrient.Buttomeasuretheamountofnutrientavailableinthesoilwearegoingtodesigndeviceorinstrumentwhichgivesusproperreading of micronutrient. Followingarethemainobjectives oftheproposedsystem
- Design and develop an Arduino-based sensor interfacing for reading soil parameters.
- Buildainterfacebetween LCDandmicrocontrollerto showthesensorreadings
- Convertingthesensor value usingADCport of Arduino.
- Establishing the cloud server connectivity in order to store all soil test records over the server with time and GPS location stamps.
All Projects, Core Electronics Projects, Electrical Projects, Power Electronics, Solar Based Projects, Electronic Products
SOLAR BASED UPS
4.8 ★
4.8 ★
8 Ratings
5 ★
6
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(8)
Highlights:
Here we propose a solar based ups project that uses solar energy to charge battery and then the DC battery is used to power an AC load using inverter.
Highlights:
Here we propose a solar based ups project that uses solar energy to charge battery and then the DC battery is used to power an AC load using inverter.
All Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Solar Based Projects
SOLAR CHARGE CONTROLLER
4.8 ★
4.8 ★
4 Ratings
5 ★
3
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
In this project we are using arduino uno which is the main part of project, variable battery supply, solar panel, adapter and led panel as a load. Here variable battery source is used for demonstration purpose through which we can vary the voltage with the help of pot.
Highlights:
In this project we are using arduino uno which is the main part of project, variable battery supply, solar panel, adapter and led panel as a load. Here variable battery source is used for demonstration purpose through which we can vary the voltage with the help of pot.
All Projects, Arduino Projects, Electrical Projects, Solar Based Projects, Electronic Products, Bluetooth Based Projects
SOLAR GRASS CUTTER OVER RF REMOTE
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
All Projects, Android Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, Solar Based Projects, Robotics Based Projects, Electronic Products, Bluetooth Based Projects
SOLAR GRASS CUTTER USING MICRO-CONTROLLER
4.7 ★
4.7 ★
30 Ratings
5 ★
20
4 ★
10
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
Now a days the electric power and fuel are the most used energy sources but they are not eco-friendly and these also need manpower .so we have thought of doing a project on the grass-cutting vehicle which uses Eco-friendly resources like solar energy and also to decrease the human interaction. This project aims of designing an Automated Grass Cutter using solar energy[1].
Highlights:
Now a days the electric power and fuel are the most used energy sources but they are not eco-friendly and these also need manpower .so we have thought of doing a project on the grass-cutting vehicle which uses Eco-friendly resources like solar energy and also to decrease the human interaction. This project aims of designing an Automated Grass Cutter using solar energy[1].
All Projects, Android Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Mechanical Projects, Core Electrical Projects, Ultrasonic Based Projects, Robotics Based Projects, Bluetooth Based Projects
SOLAR GRASS CUTTER WITH OBSTACLE AVOIDANCE
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
These days we are facing the problems like pollution, power cut problem, etc. In order to overcome these problems, we have thought about the device, which can be performing its functions without causing any of these problems. So we have thought of doing the project on cutting grass, which uses renewable sources of energy for its operation like solar energy.
Highlights:
These days we are facing the problems like pollution, power cut problem, etc. In order to overcome these problems, we have thought about the device, which can be performing its functions without causing any of these problems. So we have thought of doing the project on cutting grass, which uses renewable sources of energy for its operation like solar energy.
All Projects, Sensor Based Projects, Android Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Ultrasonic Based Projects, Core Electrical Projects, Solar Based Projects, Robotics Based Projects, Electronic Products, Bluetooth Based Projects
SOLAR GRASS CUTTER WITH OBSTACLE AVOIDANCE WITH SPRAY
4.6 ★
4.6 ★
25 Ratings
5 ★
14
4 ★
11
3 ★
0
2 ★
0
1 ★
0
(25)
Highlights:
Agriculture is demographically the broadest economic sector and plays a significant role in the overall economy of India. For the growth of Indian economy, mechanization is necessary. The main purpose of mechanization in agriculture is to improve the overall productivity and production. The system control is done by the Arduino UNO R3. Automation is achieved by using sensors and Arduino UNO R3.
Highlights:
Agriculture is demographically the broadest economic sector and plays a significant role in the overall economy of India. For the growth of Indian economy, mechanization is necessary. The main purpose of mechanization in agriculture is to improve the overall productivity and production. The system control is done by the Arduino UNO R3. Automation is achieved by using sensors and Arduino UNO R3.