Shopping cart is empty!
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Power Electronics
SUPER / ULTRA FAST ELECTRIC CIRCUIT BREAKER
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.
Highlights:
The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.
All Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Solar Based Projects, Electronic Products
Supply Selection Using Arduino
4.2 ★
4.2 ★
5 Ratings
5 ★
1
4 ★
4
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.
Highlights:
Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.
All Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller
TACHOMETER USING 8051 MICROCONTROLLER
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
Highlights:
The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
All Projects, Thermistor Sensor Based Projects, Electrical Projects, Temprature Based Projects, Mini Project
Temperature controlled load
4 ★
4 ★
3 Ratings
5 ★
0
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn???t require human involvement for monitoring the temperature of the load.
Highlights:
This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn???t require human involvement for monitoring the temperature of the load.
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Electronic Products
THREE PHASE TRANSMISSION LINE FAULT DETECTION
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a ???Fault???. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.
Highlights:
The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a ???Fault???. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.
All Projects, Sensor Based Projects, Arduino Projects, Communication, Electrical Projects, GSM Based Projects, Electronic Products
THREE PHASE TRANSMISSION LINE FAULT DETECTION OVER GSM
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
All Projects, IOT Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Electronic Products
Three Phase Transmission Line Fault Detection Over IOT
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station
Highlights:
The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station
All Projects, Communication, Core Electronics Projects, Electrical Projects, Power Electronics, ESP 32
Three Phase Transmission Line Fault Detection Over IOT Using ESP32
4.4 ★
4.4 ★
5 Ratings
5 ★
2
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
If we look at the present Transmission line fault detection system, there are several problems, few of which include lack of skilled labour, increased risks and also time consuming process. Automating a process is known to solve many or all of such problems faced in the conventional processes. This is one such attempt to create an easy and cost-effective solution which is applicable in the upcoming power transmission systems for Electricity providers and operators at various stages or stations.
Highlights:
If we look at the present Transmission line fault detection system, there are several problems, few of which include lack of skilled labour, increased risks and also time consuming process. Automating a process is known to solve many or all of such problems faced in the conventional processes. This is one such attempt to create an easy and cost-effective solution which is applicable in the upcoming power transmission systems for Electricity providers and operators at various stages or stations.
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Electronic Products
Touch Sensor Base Dimmer
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A Arduino is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.
Highlights:
Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A Arduino is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.
All Projects, IOT Projects, Automation Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Temprature Based Projects, Ultrasonic Based Projects, Electronic Products, RFID Based Projects
TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO
4.8 ★
4.8 ★
5 Ratings
5 ★
4
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.
Highlights:
The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.