Shopping cart is empty!
All Projects, Electrical Projects, Mechanical Projects, Embedded Projects, Micro Controller, Mechatronics
ADVANCE CAR JACK CONTROLLED BY RF WIRELESS DEVICE
4.5 ★
4.5 ★
12 Ratings
5 ★
6
4 ★
6
3 ★
0
2 ★
0
1 ★
0
(12)
Highlights:
The project is designed to control the direction of car jack by using a RF technology for remote operation with a transmitter and receiver. The direction of the DC motor is depending on signal which is coming from transmitter. Hence, if the relay 1 & relay 4 gets ON then the motor rotates in forward direction. And if relay 2 & relay 3 gets ON then the motor rotates in backward direction.
Highlights:
The project is designed to control the direction of car jack by using a RF technology for remote operation with a transmitter and receiver. The direction of the DC motor is depending on signal which is coming from transmitter. Hence, if the relay 1 & relay 4 gets ON then the motor rotates in forward direction. And if relay 2 & relay 3 gets ON then the motor rotates in backward direction.
ANDROID BASED NOTICE BOARD
4.3 ★
4.3 ★
4 Ratings
5 ★
2
4 ★
1
3 ★
1
2 ★
0
1 ★
0
(4)
Highlights:
Notice Board is primary thing in any institution / organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is quite a difficult process. A separate person is required to take care of this notices display. This project deals about an advanced hi-tech wireless notice board.
Highlights:
Notice Board is primary thing in any institution / organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is quite a difficult process. A separate person is required to take care of this notices display. This project deals about an advanced hi-tech wireless notice board.
All Projects, Android Projects, Electrical Projects, Mechanical Projects, Embedded Projects, Micro Controller, Bluetooth Based Projects
ANDROID CONTROLLED CAR JACK
4.4 ★
4.4 ★
14 Ratings
5 ★
7
4 ★
6
3 ★
1
2 ★
0
1 ★
0
(14)
Highlights:
The project is designed to control the direction of car jack by using an android phone with the help of Bluetooth device. The direction of the DC motor is depending on the signal which is coming from mobile. Hence, if we press UP, this is present on your mobile then the relay 1 & relay 4 gets ON, so the motor rotates in forward direction. And if when we press DOWN from mobile the relay 2 & relay 3 gets ON then the motor rotates in backward direction.
Highlights:
The project is designed to control the direction of car jack by using an android phone with the help of Bluetooth device. The direction of the DC motor is depending on the signal which is coming from mobile. Hence, if we press UP, this is present on your mobile then the relay 1 & relay 4 gets ON, so the motor rotates in forward direction. And if when we press DOWN from mobile the relay 2 & relay 3 gets ON then the motor rotates in backward direction.
All Projects, Automation Projects, Android Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, School project, Bluetooth Based Projects
ANDROID CONTROLLED HOME APPLIANCES
4.5 ★
4.5 ★
15 Ratings
5 ★
7
4 ★
8
3 ★
0
2 ★
0
1 ★
0
(15)
Highlights:
The main objective of this project is to develop a home automation system with Android application controlled remote.The microcontroller used here is of 8051 family. The loads are interfaced to the microcontroller using Opto-isolators and TRIAC???s.
Highlights:
The main objective of this project is to develop a home automation system with Android application controlled remote.The microcontroller used here is of 8051 family. The loads are interfaced to the microcontroller using Opto-isolators and TRIAC???s.
All Projects, Android Projects, Power Electronics, Embedded Projects, Robotics Based Projects, Mechatronics, Bluetooth Based Projects
ANDROID CONTROLLED ROBOT
4.8 ★
4.8 ★
4 Ratings
5 ★
3
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
The project is designed to control the ROBOT by using a Android technology for remote operation using an transmitter as smart phone and receiver as Bluetooth device. The direction of the DC motor is directly proportional to the voltage applied across its terminals.
Highlights:
The project is designed to control the ROBOT by using a Android technology for remote operation using an transmitter as smart phone and receiver as Bluetooth device. The direction of the DC motor is directly proportional to the voltage applied across its terminals.
ARDUINO BASED RADAR
4.5 ★
4.5 ★
4 Ratings
5 ★
2
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(4)
AUTO POWER SUPPLY CONTROL FROM 4 DIFFERENT SOURCES
4.5 ★
4.5 ★
30 Ratings
5 ★
17
4 ★
12
3 ★
1
2 ★
0
1 ★
0
(30)
Highlights:
The main objective of this project is to provide uninterrupted power supply to a load, by selecting the supply source automatically from any available one out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problem in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.
Highlights:
The main objective of this project is to provide uninterrupted power supply to a load, by selecting the supply source automatically from any available one out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problem in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.
AUTO SELECTION OF ANY AVAILABLE PHASE, IN 3 PHASE SUPPLY SYSTEM
4.5 ★
4.5 ★
30 Ratings
5 ★
16
4 ★
14
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
The project is designed to provide uninterrupted AC mains supply i.e., 230 volt to a single phase load. This is achieved by automatic changeover of the load from the missing phase to the next available phase in a 3 phase system.
Highlights:
The project is designed to provide uninterrupted AC mains supply i.e., 230 volt to a single phase load. This is achieved by automatic changeover of the load from the missing phase to the next available phase in a 3 phase system.
All Projects, Automation Projects, IR Based Projects, Mechanical Projects, Embedded Projects, Micro Controller, Electronic Products
AUTOMATIC CONVEYER BELT FOR WATER FILLING
4.2 ★
4.2 ★
10 Ratings
5 ★
3
4 ★
6
3 ★
1
2 ★
0
1 ★
0
(10)
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
All Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Power Electronics, Embedded Projects, Mini Project
Automatic Load Sharing By Parallel Transformer
4.5 ★
4.5 ★
30 Ratings
5 ★
16
4 ★
14
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
Transformer is basically a static device which transfers the electrical power from one circuit to another circuit with desired change in voltage and current at constant frequency. It is only one device which operates at highest efficiency at full load condition. But abnormal condition occurs at overloading condition which may result in severe problem in future.
Highlights:
Transformer is basically a static device which transfers the electrical power from one circuit to another circuit with desired change in voltage and current at constant frequency. It is only one device which operates at highest efficiency at full load condition. But abnormal condition occurs at overloading condition which may result in severe problem in future.
All Projects, Electrical Projects, Core Electrical Projects, Power Electronics, Embedded Projects, Micro Controller
AUTOMATIC POWER FACTOR COMPENSATION FOR INDUSTRIAL POWER USE TO MINIMIZE PENALTY
4.5 ★
4.5 ★
30 Ratings
5 ★
16
4 ★
13
3 ★
1
2 ★
0
1 ★
0
(30)
Highlights:
The project is designed to minimize penalty for industrial units using automatic power factor correction unit. The micro-controller used in this project belongs to 8051 family.??In this proposed system, two zero crossing detectors are used for detecting zero crossing of voltage and current.
Highlights:
The project is designed to minimize penalty for industrial units using automatic power factor correction unit. The micro-controller used in this project belongs to 8051 family.??In this proposed system, two zero crossing detectors are used for detecting zero crossing of voltage and current.