Shopping cart is empty!
RAIN SENSING ALERT SYSTEM
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The project is designed to develop an automatic rain alert system that switches a siren on or off upon sensing the rain. In some field use of proper method of rain alert system is important. The advantage of using this method is to reduce human intervention.
Highlights:
The project is designed to develop an automatic rain alert system that switches a siren on or off upon sensing the rain. In some field use of proper method of rain alert system is important. The advantage of using this method is to reduce human intervention.
All Projects, Communication, Embedded Projects, Micro Controller, Mini Project, School project, Robotics Based Projects, Mechatronics
RF wireless controlled ROBOT
5 ★
5 ★
3 Ratings
5 ★
3
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The project is designed to control the ROBOT by using a RF technology for remote operation using an transmitter and receiver. The speed of the DC motor is directly proportional to the voltage applied across its terminals. Hence, if the voltage across motor terminal is varied, then the speed can also be varied.
Highlights:
The project is designed to control the ROBOT by using a RF technology for remote operation using an transmitter and receiver. The speed of the DC motor is directly proportional to the voltage applied across its terminals. Hence, if the voltage across motor terminal is varied, then the speed can also be varied.
All Projects, MQ-7 Based Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Micro Controller, Mini Project, School project, Electronic Products
SMOKE DETECTOR
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
SMOOTH OR SOFT START OF SINGLE PHASE INDUCTION MOTOR
4.6 ★
4.6 ★
30 Ratings
5 ★
17
4 ★
13
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
Highlights:
The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
All Projects, Electrical Projects, Core Electrical Projects, Power Electronics, Embedded Projects, Micro Controller, Mini Project
SOFT START OF INDUCTION MOTOR USING ACPWM
4.7 ★
4.7 ★
30 Ratings
5 ★
20
4 ★
10
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
Highlights:
This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
All Projects, Electrical Projects, Embedded Projects, Micro Controller, Mini Project, School project, Solar Based Projects, Mechatronics
SUN TRACKING SOLAR PANEL
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days.
Highlights:
This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days.
All Projects, Electrical Projects, Embedded Projects, Micro Controller, Mini Project, School project, Solar Based Projects, Mechatronics
Sun Tracking Solar Panel
4.2 ★
4.2 ★
5 Ratings
5 ★
1
4 ★
4
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
In this project, LDR???s are working as light detectors. Before we go into detail, we will have to understand how the LDR???s work. LDR (Light Dependent Resistor) also known as photo resistor is the light sensitive device. Its resistance decrease when the light falls on it and that???s why it is frequently used in Dark or Light Detector Circuit. Check the various circuits based on LDR here.
Highlights:
In this project, LDR???s are working as light detectors. Before we go into detail, we will have to understand how the LDR???s work. LDR (Light Dependent Resistor) also known as photo resistor is the light sensitive device. Its resistance decrease when the light falls on it and that???s why it is frequently used in Dark or Light Detector Circuit. Check the various circuits based on LDR here.
Table Saw Using Drill machine
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
Highlights:
In this project we have created table saw by using Drill machine . drill machine is mounted on strong base table with nut & bolt system so that it can be assembled & dismantled easily. In drill machine chuck Cutter blade is tightened.On cutting surface Scale is sketched to identify and mark cutting width.Cutting surface made of plywood?? is attached on table by hinges and nut-bolt to make easy assembling & dismantling.
This project helps us to drill & cut plywood without any high investment.
$144.24 $156.26 8% Off
Highlights:
In this project we have created table saw by using Drill machine . drill machine is mounted on strong base table with nut & bolt system so that it can be assembled & dismantled easily. In drill machine chuck Cutter blade is tightened.On cutting surface Scale is sketched to identify and mark cutting width.Cutting surface made of plywood?? is attached on table by hinges and nut-bolt to make easy assembling & dismantling.
This project helps us to drill & cut plywood without any high investment.
All Projects, Thermistor Sensor Based Projects, Electrical Projects, Temprature Based Projects, Mini Project
Temperature controlled load
4 ★
4 ★
3 Ratings
5 ★
0
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn???t require human involvement for monitoring the temperature of the load.
Highlights:
This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn???t require human involvement for monitoring the temperature of the load.
All Projects, Electrical Projects, Temprature Based Projects, Power Electronics, Micro Controller, Mini Project, Electronic Products
Transformer Health Monitoring
4.3 ★
4.3 ★
30 Ratings
5 ★
10
4 ★
20
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.
Highlights:
Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.
All Projects, Sensor Based Projects, Arduino Projects, DHT Sensor Based Projects, Electrical Projects, Temprature Based Projects, Ultrasonic Based Projects, Mini Project, Electronic Products
Transformer Health Monitoring
5 ★
5 ★
3 Ratings
5 ★
3
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature , Less Oil etc.
Highlights:
Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature , Less Oil etc.