Shopping cart is empty!
All Projects, Automation Projects, IR Based Projects, Mechanical Projects, Embedded Projects, Micro Controller, Electronic Products
AUTOMATIC CONVEYER BELT FOR WATER FILLING
4.2 ★
4.2 ★
10 Ratings
5 ★
3
4 ★
6
3 ★
1
2 ★
0
1 ★
0
(10)
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
AUTOMATIC IDENTIFICATION OF ELECTRICITY THEFT
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
In proposed system automatic identification of electricity theft using arduino. If we implement the project for a complete network of a area which will be consuming a very huge amount of energy. Here we are using arduino board, LCD display, current sensor, buzzer. And here in this project we can calculate the energy or power transmitted by the KEB and the energy consumed by the network of area. If both transmitted power by the KEB and the consumed power by the area differ by a large value the arduino will display these difference in the power reading on the LCD and the buzzer located in the KEB starts beeping indicating theft of electricity. As total Power losses equals transmission power losses plus distribution power losses.
Highlights:
In proposed system automatic identification of electricity theft using arduino. If we implement the project for a complete network of a area which will be consuming a very huge amount of energy. Here we are using arduino board, LCD display, current sensor, buzzer. And here in this project we can calculate the energy or power transmitted by the KEB and the energy consumed by the network of area. If both transmitted power by the KEB and the consumed power by the area differ by a large value the arduino will display these difference in the power reading on the LCD and the buzzer located in the KEB starts beeping indicating theft of electricity. As total Power losses equals transmission power losses plus distribution power losses.
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, PIC Microcontroller, Electronic Products
AUTOMATIC PHASE SELECTION USING PIC MICROCONTROLLER
4.5 ★
4.5 ★
4 Ratings
5 ★
2
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(4)
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, PIC Microcontroller, Electronic Products
AUTOMATIC POWER FACTOR CORRECTION USING PIC- MICROCONTROLLER
4.8 ★
4.8 ★
5 Ratings
5 ★
4
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
In this proposed system, two zero crossing detectors are used for detecting?? zero crossing of voltage and current. The project is designed to minimize?? penalty for industrial units?? using automatic power factor correction unit. The PIC microcontroller used in this project .
The time lag between the zero-voltage pulse and zero-current pulse is duly generated by suitable operational amplifier circuits in comparator mode is fed to two interrupt pins of a microcontroller. The program takes over to actuate appropriate number of relays from its output to bring shunt capacitors into load circuit to get the power factor till it reaches near unity.
Highlights:
In this proposed system, two zero crossing detectors are used for detecting?? zero crossing of voltage and current. The project is designed to minimize?? penalty for industrial units?? using automatic power factor correction unit. The PIC microcontroller used in this project .
The time lag between the zero-voltage pulse and zero-current pulse is duly generated by suitable operational amplifier circuits in comparator mode is fed to two interrupt pins of a microcontroller. The program takes over to actuate appropriate number of relays from its output to bring shunt capacitors into load circuit to get the power factor till it reaches near unity.
All Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Mechanical Projects, Solar Based Projects, Electronic Products
Automatic Solar Pannel Cleaning By Sensing Solar Voltage And Light Luminance
4.7 ★
4.7 ★
7 Ratings
5 ★
5
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(7)
Highlights:
The solar PV modules are generally employed in dusty environments. The dust gets accumulated on the front surface of the module and blocks the incident light from the sun. It reduces the power generation capacity of the module. The power output reduces as much as by 50% if the module is not cleaned for a month.
Highlights:
The solar PV modules are generally employed in dusty environments. The dust gets accumulated on the front surface of the module and blocks the incident light from the sun. It reduces the power generation capacity of the module. The power output reduces as much as by 50% if the module is not cleaned for a month.
Automatic Street Light Controal Depend on The Intensity of The Light
4.4 ★
4.4 ★
5 Ratings
5 ★
2
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
In this project we purpose an advanced automatic street light control system that is capable of replacing the old light control system because the manual control of light is not effective in this modern era.
Highlights:
In this project we purpose an advanced automatic street light control system that is capable of replacing the old light control system because the manual control of light is not effective in this modern era.
All Projects, Sensor Based Projects, Arduino Projects, IR Based Projects, Core Electronics Projects, Electronic Products
Automatic Street Light Intensity Control Based On The IR Sensor Using Arduino
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
Highlights:
Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
AUTOMATIC SWITCH OVER OF DIESEL GENERATOR USING PLC
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
All Projects, Sensor Based Projects, Electrical Projects, Embedded Projects, Micro Controller, Mini Project, School project, Electronic Products
Automatic Train Traffic Gate Control
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
Automatic Railway Gate Control System is a simple but very useful project, which help is automatically opening and closing the railway gate upon detecting arrival or departure of the train.In general, Railway gates are opened or closed manually by a gate keeper. The information about arrival of train for opening or closing of door is received from nearby station. But some railway crossings are totally unmanned and many railway accidents occur at these unmanned level crossings.
Highlights:
Automatic Railway Gate Control System is a simple but very useful project, which help is automatically opening and closing the railway gate upon detecting arrival or departure of the train.In general, Railway gates are opened or closed manually by a gate keeper. The information about arrival of train for opening or closing of door is received from nearby station. But some railway crossings are totally unmanned and many railway accidents occur at these unmanned level crossings.
AUTOMATIC WIPER SYSTEM USING ARDUINO
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
Automatic zebra crossing detector
4.8 ★
4.8 ★
5 Ratings
5 ★
4
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(5)