Showing 17–32 of 42 results
-
LINE FOLLOWING ROBOTIC VEHICLE
₹5,100.00₹3,500.00The project is designed to develop a robotic vehicle that follows a specific path. This project doesn’t require a microcontroller for its operation. A pair of photo sensors comprising IR transmitter and photo diode is used to detect the specified path for its movement.
-
MUSIC REACTIVE FLASH LIGHT LED USING MICROPHONE
₹2,000.00₹1,400.00In this project we are using 9v battery, transistors, led’s and microphone. So whenever the high pick sound is detected by this microphone led’s will glow. Means the led’s getting ON. And whenever the sound is stop then led’s getting OFF.
-
RAIN SENSING ALERT SYSTEM
₹3,200.00₹2,400.00The project is designed to develop an automatic rain alert system that switches a siren on or off upon sensing the rain. In some field use of proper method of rain alert system is important. The advantage of using this method is to reduce human intervention.
-
RF wireless controlled ROBOT
₹4,400.00₹3,400.00The project is designed to control the ROBOT by using a RF technology for remote operation using an transmitter and receiver. The speed of the DC motor is directly proportional to the voltage applied across its terminals. Hence, if the voltage across motor terminal is varied, then the speed can also be varied.
-
SMOOTH OR SOFT START OF SINGLE PHASE INDUCTION MOTOR
₹5,450.00₹4,450.00The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
-
SOFT START OF INDUCTION MOTOR USING ACPWM
₹8,400.00₹5,800.00This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
-
SUN TRACKING SOLAR PANEL
₹7,500.00₹5,000.00This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.
-
Sun Tracking Solar Panel
₹13,000.00₹12,000.00In this project, LDR’s are working as light detectors. Before we go into detail, we will have to understand how the LDR’s work. LDR (Light Dependent Resistor) also known as photo resistor is the light sensitive device. Its resistance decrease when the light falls on it and that’s why it is frequently used in Dark or Light Detector Circuit. Check the various circuits based on LDR here.
-
-8%Table Saw Using Drill machine
₹13,000.00₹12,000.00In this project we have created table saw by using Drill machine . drill machine is mounted on strong base table with nut & bolt system so that it can be assembled & dismantled easily. In drill machine chuck Cutter blade is tightened.On cutting surface Scale is sketched to identify and mark cutting width.Cutting surface made of plywood is attached on table by hinges and nut-bolt to make easy assembling & dismantling.
This project helps us to drill & cut plywood without any high investment.
-
Temperature controlled load
₹3,800.00₹3,000.00This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn’t require human involvement for monitoring the temperature of the load.
