Shopping cart is empty!
DIGITAL CLOCK USING PIC CONTROLLER
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The main goal of this project is Digital clock using PIC micro-controller. In this system, a large number of switches are activated to adjust the time and date.
Highlights:
The main goal of this project is Digital clock using PIC micro-controller. In this system, a large number of switches are activated to adjust the time and date.
DISH POSITIONING CONTROL BY ANDROID PHONE
4 ★
4 ★
3 Ratings
5 ★
0
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The project is designed to develop a dish positioning system which can be operated by using a conventional android phone. The main application of using a dish is to receive signal from satellites and other broadcasting sources. In order to position the dish to the exact angle to receive the maximum signal of a particular frequency, it needs to be adjusted manually
Highlights:
The project is designed to develop a dish positioning system which can be operated by using a conventional android phone. The main application of using a dish is to receive signal from satellites and other broadcasting sources. In order to position the dish to the exact angle to receive the maximum signal of a particular frequency, it needs to be adjusted manually
All Projects, Sensor Based Projects, Ultrasonic Based Projects, Embedded Projects, Micro Controller, Electronic Products
DISTANCE MEASUREMENT BY ULTRASONIC SENSOR
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
Highlights:
The implementation of distance measurement system using ultrasonic wavesThe scope of the project in future can be heightened by using high-frequency transducers to make it fit for medical applications like ultrasound machine
Highlights:
The implementation of distance measurement system using ultrasonic wavesThe scope of the project in future can be heightened by using high-frequency transducers to make it fit for medical applications like ultrasound machine
All Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Robotics Based Projects
Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
Highlights:
This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.
Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today???s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.
There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.
Highlights:
This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.
Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today???s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.
There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.
DTMF HOME AUTOMATION
4.5 ★
4.5 ★
4 Ratings
5 ★
2
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(4)
All Projects, Arduino Projects, Communication, Mechanical Projects, Solar Based Projects, Electronic Products
DUAL AXIS SUN TRACKING SYSTEM WITH THE WEATHER MONITORING SYSTEM
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
All Projects, IOT Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electronic Products
EARTHQUAKE DETECTION & IT???S MONITORING OVER IOT
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
In this processed system, we are monitoring the earthquake, if any vibration/ tilt of the earth???s surface takes place; the system will alert us and send the data over IOT page. So to avoid the life loss and economic loss we are developing this device.
In this project we are using Arduino board i.e. the heart of project, 2-vibrator sensor, 2-accelerometer, LCD display. An??accelerometer??is an electromechanical device used to measure acceleration forces and also for sensing vibrations in systems or for orientation applications. So when some orientation according to x-axis, y-axis or z-axis happens to the earth???s surface then it will display a message on LCD that there is Earthquake. And also sends data on IOT page through Wi-Fi module.
Highlights:
In this processed system, we are monitoring the earthquake, if any vibration/ tilt of the earth???s surface takes place; the system will alert us and send the data over IOT page. So to avoid the life loss and economic loss we are developing this device.
In this project we are using Arduino board i.e. the heart of project, 2-vibrator sensor, 2-accelerometer, LCD display. An??accelerometer??is an electromechanical device used to measure acceleration forces and also for sensing vibrations in systems or for orientation applications. So when some orientation according to x-axis, y-axis or z-axis happens to the earth???s surface then it will display a message on LCD that there is Earthquake. And also sends data on IOT page through Wi-Fi module.
All Projects, IR Based Projects, Embedded Projects, Mini Project, School project, Robotics Based Projects, Mechatronics
EDGE AVOIDANCE ROBOT BY ARDUINO
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
Highlights:
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
ELECTRIC LINE MAN SAFETY WITH PASSWORD BASED CIRCUIT BREAKER
4.5 ★
4.5 ★
30 Ratings
5 ★
15
4 ★
15
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
The project is designed to control a circuit breaker by using a password for the safety of electric man. Critical electrical accidents to line men are on the rise during electric line repair due to lack of communication and co-ordination between the maintenance staff and electric substation staff.
Highlights:
The project is designed to control a circuit breaker by using a password for the safety of electric man. Critical electrical accidents to line men are on the rise during electric line repair due to lack of communication and co-ordination between the maintenance staff and electric substation staff.
Electrified road for charging vehicle/Electric vehicle charging on road by wireless charging
4.4 ★
4.4 ★
5 Ratings
5 ★
2
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(5)
ENERGY MONITORING OVER IOT BLINK APP
4.2 ★
4.2 ★
5 Ratings
5 ★
1
4 ★
4
3 ★
0
2 ★
0
1 ★
0
(5)