Shopping cart is empty!
All Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Temprature Based Projects, Core Electrical Projects, Solar Based Projects, Electronic Products
Solar Power Vaccine Storage Refrigerator
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Large areas of many developing countries have no grid electricity. This is a serious challenge that threatens the continuity of the vaccine cold chain. The main alternatives to electrically powered refrigerators available for many years???kerosene- and gas-driven refrigerators???are plagued by problems with gas supply interruptions, low efficiency, poor temperature control, and frequent maintenance needs. There are currently no kerosene- or gas-driven refrigerators that qualify under the minimum standards established by the World Health Organization (WHO) Performance, Quality, and Safety (PQS) system.
Highlights:
Large areas of many developing countries have no grid electricity. This is a serious challenge that threatens the continuity of the vaccine cold chain. The main alternatives to electrically powered refrigerators available for many years???kerosene- and gas-driven refrigerators???are plagued by problems with gas supply interruptions, low efficiency, poor temperature control, and frequent maintenance needs. There are currently no kerosene- or gas-driven refrigerators that qualify under the minimum standards established by the World Health Organization (WHO) Performance, Quality, and Safety (PQS) system.
All Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, Electronic Products
SPEED CHECKER TO DETECT RASH DRIVING ON HIGHWAYS
4.3 ★
4.3 ★
13 Ratings
5 ★
4
4 ★
9
3 ★
0
2 ★
0
1 ★
0
(13)
Highlights:
The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.
Highlights:
The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Power Electronics, Embedded Projects, Micro Controller
SPEED CONTROL OF FAN USING RF REMOTE
4.3 ★
4.3 ★
4 Ratings
5 ★
1
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
The main intention of this project is to develop an fan motor speed control system which is helpful to control the speed of fan motor using TRIAC and RF communication.
Highlights:
The main intention of this project is to develop an fan motor speed control system which is helpful to control the speed of fan motor using TRIAC and RF communication.
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Micro Controller, Electronic Products
Speed Control Of Induction Motor Using Firing Angle Control
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The main object of this project is to develop speed control of two induction motor using firing angle control system which is helpful to control the speed of an induction motor using microcontroller
In this project, the zero-crossing point of the voltage waveform is detected by a comparator whose output is then fed to the microcontroller. Then, it provides the required delayed triggering pulses to a pair of TRIAC through an opto-isolator connected to this circuit. Finally, power is applied to the load through the TRIAC. Four push-button switches are interfaced to the controller for increasing and decreasing the AC power to the load. In this project, a lamp is used in the place of induction motor demonstration purposes. The motor speed variation depends on the power reduction.
Highlights:
The main object of this project is to develop speed control of two induction motor using firing angle control system which is helpful to control the speed of an induction motor using microcontroller
In this project, the zero-crossing point of the voltage waveform is detected by a comparator whose output is then fed to the microcontroller. Then, it provides the required delayed triggering pulses to a pair of TRIAC through an opto-isolator connected to this circuit. Finally, power is applied to the load through the TRIAC. Four push-button switches are interfaced to the controller for increasing and decreasing the AC power to the load. In this project, a lamp is used in the place of induction motor demonstration purposes. The motor speed variation depends on the power reduction.
All Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, PIC Microcontroller, Electronic Products
SPEED CONTROL OF TWO INDUCTION MOTOR USING ACPWM
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
This project attempts a new speed control technique for the single-phase a.c. ????induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. ????induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.
Highlights:
This project attempts a new speed control technique for the single-phase a.c. ????induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. ????induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.
Stepper Motor Speed Control Using GSM & Arduino
5 ★
5 ★
2 Ratings
5 ★
2
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
Our proposed project allows user to control the speed and direction of a stepper motor remotely from anywhere. The system works by receiving stepper motor control instructions from user through an SMS message.
Highlights:
Our proposed project allows user to control the speed and direction of a stepper motor remotely from anywhere. The system works by receiving stepper motor control instructions from user through an SMS message.
All Projects, IOT Projects, DHT Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects
SUBSTATION MONITORING OVER IOT
4.6 ★
4.6 ★
30 Ratings
5 ★
17
4 ★
13
3 ★
0
2 ★
0
1 ★
0
(30)
Highlights:
The purpose of this project is to acquire the remote electrical parameters like voltage, current and frequency and send these real time values over network along with temperature at power station. This project is also designed to protect the electrical circuitry by operating a relay.
Highlights:
The purpose of this project is to acquire the remote electrical parameters like voltage, current and frequency and send these real time values over network along with temperature at power station. This project is also designed to protect the electrical circuitry by operating a relay.
All Projects, DHT Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, GSM Based Projects, Electronic Products
SUBSTATION MONITORING USING ARDUINO OVER GSM
4.6 ★
4.6 ★
30 Ratings
5 ★
17
4 ★
13
3 ★
0
2 ★
0
1 ★
0
(30)
All Projects, LDR Sensor Based Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Solar Based Projects
SUN TRACKING SOLAR PANEL TO TRACK THE MAXIMUM RAYS BY USING SERVO MOTOR
5 ★
5 ★
2 Ratings
5 ★
2
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
This project employs sun tracking solar panel to track the maximum rays by using servo motor. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.
Highlights:
This project employs sun tracking solar panel to track the maximum rays by using servo motor. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.
All Projects, LDR Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Solar Based Projects
SUN TRACKING SOLAR PANEL TO TRACK THE MAXIMUM RAYS USING LDR’S
4 ★
4 ★
2 Ratings
5 ★
0
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
This project employs sun tracking solar panel to track the maximum rays using ldr’s. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.
Highlights:
This project employs sun tracking solar panel to track the maximum rays using ldr’s. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Power Electronics
SUPER / ULTRA FAST ELECTRIC CIRCUIT BREAKER
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.
Highlights:
The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.