Shopping cart is empty!
All Projects, Android Projects, Communication, Electrical Projects, Embedded Projects, Micro Controller, School project
SPEECH CONTROLLED HOME APPLIANCES
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The main objective of the project is to develop a speech controlled home appliances that load is ON/off when a voice signal is sent from the users mobile. While the user sends the signal from the mobile, the remote operation is achieved by any smart-phone
Highlights:
The main objective of the project is to develop a speech controlled home appliances that load is ON/off when a voice signal is sent from the users mobile. While the user sends the signal from the mobile, the remote operation is achieved by any smart-phone
Speech Recognised Notice board
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Notice Board is primary thing in any institution / organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is quite a difficult process. A separate person is required to take care of this notices display. This project deals about an advanced hi-tech wireless notice board.
Highlights:
Notice Board is primary thing in any institution / organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is quite a difficult process. A separate person is required to take care of this notices display. This project deals about an advanced hi-tech wireless notice board.
All Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, Electronic Products
SPEED CHECKER TO DETECT RASH DRIVING ON HIGHWAYS
4.3 ★
4.3 ★
13 Ratings
5 ★
4
4 ★
9
3 ★
0
2 ★
0
1 ★
0
(13)
Highlights:
The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.
Highlights:
The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Power Electronics, Embedded Projects, Micro Controller
SPEED CONTROL OF FAN USING RF REMOTE
4.3 ★
4.3 ★
4 Ratings
5 ★
1
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
The main intention of this project is to develop an fan motor speed control system which is helpful to control the speed of fan motor using TRIAC and RF communication.
Highlights:
The main intention of this project is to develop an fan motor speed control system which is helpful to control the speed of fan motor using TRIAC and RF communication.
SPEED CONTROL OF INDUCTION MOTOR
4 ★
4 ★
2 Ratings
5 ★
0
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using controller
Highlights:
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using controller
SPEED CONTROL OF INDUCTION MOTOR USING ACPWM
4.5 ★
4.5 ★
20 Ratings
5 ★
10
4 ★
10
3 ★
0
2 ★
0
1 ★
0
(20)
Highlights:
This project attempts a new speed control technique for the single-phase a.c. induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller.
Highlights:
This project attempts a new speed control technique for the single-phase a.c. induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller.
All Projects, Android Projects, Electrical Projects, Embedded Projects, Micro Controller, Bluetooth Based Projects
SPEED CONTROL OF INDUCTION MOTOR USING ANDROID
4.5 ★
4.5 ★
20 Ratings
5 ★
9
4 ★
11
3 ★
0
2 ★
0
1 ★
0
(20)
Highlights:
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using TRIAC.
Highlights:
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using TRIAC.
All Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Micro Controller, Electronic Products
Speed Control Of Induction Motor Using Firing Angle Control
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The main object of this project is to develop speed control of two induction motor using firing angle control system which is helpful to control the speed of an induction motor using microcontroller
In this project, the zero-crossing point of the voltage waveform is detected by a comparator whose output is then fed to the microcontroller. Then, it provides the required delayed triggering pulses to a pair of TRIAC through an opto-isolator connected to this circuit. Finally, power is applied to the load through the TRIAC. Four push-button switches are interfaced to the controller for increasing and decreasing the AC power to the load. In this project, a lamp is used in the place of induction motor demonstration purposes. The motor speed variation depends on the power reduction.
Highlights:
The main object of this project is to develop speed control of two induction motor using firing angle control system which is helpful to control the speed of an induction motor using microcontroller
In this project, the zero-crossing point of the voltage waveform is detected by a comparator whose output is then fed to the microcontroller. Then, it provides the required delayed triggering pulses to a pair of TRIAC through an opto-isolator connected to this circuit. Finally, power is applied to the load through the TRIAC. Four push-button switches are interfaced to the controller for increasing and decreasing the AC power to the load. In this project, a lamp is used in the place of induction motor demonstration purposes. The motor speed variation depends on the power reduction.
Speed control of stepper motor using 8051 microcontroller
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
All Projects, Core Electronics Projects, Electrical Projects, Embedded Projects, Micro Controller, PIC Microcontroller, Electronic Products
SPEED CONTROL OF TWO INDUCTION MOTOR USING ACPWM
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
This project attempts a new speed control technique for the single-phase a.c. ????induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. ????induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.
Highlights:
This project attempts a new speed control technique for the single-phase a.c. ????induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. ????induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.
All Projects, Automation Projects, IR Based Projects, Electrical Projects, Core Electrical Projects, Power Electronics, Embedded Projects, Micro Controller, School project
STREET LIGHT THAT GLOWS ON DETECTING VEHICLE MOVEMENT
4.1 ★
4.1 ★
25 Ratings
5 ★
4
4 ★
20
3 ★
1
2 ★
0
1 ★
0
(25)
Highlights:
This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.
Highlights:
This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.
All Projects, Electrical Projects, Embedded Projects, Micro Controller, Mini Project, School project, Solar Based Projects, Mechatronics
SUN TRACKING SOLAR PANEL
4.5 ★
4.5 ★
2 Ratings
5 ★
1
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days.
Highlights:
This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always ??? for example, during cloudy days.