Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino

Sensor Based Projects

Showing 49–64 of 170 results

  • 5.00 out of 5

    Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino

    9,500.00 8,900.00

    This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.

    Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today’s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.

    There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.

    Select options
  • 4.50 out of 5

    EARTHQUAKE DETECTION & IT’S MONITORING OVER IOT

    10,800.00 9,000.00

    In this processed system, we are monitoring the earthquake, if any vibration/ tilt of the earth’s surface takes place; the system will alert us and send the data over IOT page. So to avoid the life loss and economic loss we are developing this device.

    In this project we are using Arduino board i.e. the heart of project, 2-vibrator sensor, 2-accelerometer, LCD display. An accelerometer is an electromechanical device used to measure acceleration forces and also for sensing vibrations in systems or for orientation applications. So when some orientation according to x-axis, y-axis or z-axis happens to the earth’s surface then it will display a message on LCD that there is Earthquake. And also sends data on IOT page through Wi-Fi module.

    Select options
  • 4.33 out of 5

    EDGE AVOIDANCE ROBOT BY ARDUINO

    6,000.00 4,600.00

    The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.

    Select options
  • 5.00 out of 5

    FACE DETECTION BASED LOCKING SYSTEM USING RASPBERRY PI CAMERA FOR HIGH ALERT SECURITY

    22,800.00 19,000.00

    The project deals with the design and implementation of secure locking automation using Raspberry Pi Bio-metrics refers to metrics related to human characteristics. Face recognition system is widely used for human identification due to its capability to measure and subsequently identifies human identification especially for security purposes. Bio-metrics authentication (or realistic authentication) is used in computer science as a form of identification and access control. It is also used to identify individuals in groups that are under surveillance. Open CV/ Python library is formulated as given images of a scene identify or verify one or more persons in the scene using a stored database of faces. Thus, the images are extracted and allowed to match with the database images. If the images are matched, the door opens automatically.

    Select options
  • 4.50 out of 5

    Finger Print Based Voting Machine

    10,000.00 9,200.00

    Fingerprint Voting System was implemented with the Arduino technology. In this System a voter can poll his vote easily. In this database server all voters’ information was stored to register in this system, the voter should fill a registration form with the help of a user id and password. This information will be checked by the database server.

    Select options
  • 4.25 out of 5

    FINGER PRINT SENSOR AC LOAD CONTROL

    11,300.00 8,200.00

    The main objective of this project is to control the ac load by using Finger print system. Authorised user finger print is taken over the sensor to switch the ac load.

    Select options
  • 4.33 out of 5

    FINGERPRINT BASE BIKE START

    10,000.00 8,900.00

    Vehicle security is an important issue these days due to the rising number of vehicle thefts. Here we propose a solution to this problem by using a fingerprint authenticated vehicle starter system. The system provides a secure and hassle free way to start/stop vehicle engine. Project is user friendly for change the fingerprint.

    Select options
  • 4.67 out of 5

    FIRE FIGHTING ROBOT USING ARDUINO

    9,000.00 7,800.00

    Fire disaster is a common threat to lives and property. An automatic fire extinguishing strategy provides real-time monitoring, exploration, and programmed fire alarm. This projects presents the design of a low-cost, robust and secure fire protection system for buildings.

    Select options
  • 0 out of 5

    FLOOR CLEANING ROBOT WITH OBSTACLE DETECTION AND AUTO SET DIRECTION

    13,200.00 12,200.00
    Select options
  • 4.50 out of 5

    GAS ALERT SYSTEM OVER GSM

    10,500.00 8,800.00

    We have an LPG Sensor Project using Arduino and MQ2 sensor before – which senses lpg leak and produces sound alarm. The project also has a relay system which turns ON or OFF a particular device upon gas leak (say we can turn the main electrical supply OFF upon gas leak to prevent fire).

    Select options
  • 4.67 out of 5

    GSM & GPS BASED SOLDIER TRACKING & HEALTH MONITORING SYSTEM

    17,800.00 14,000.00

    Army is one of the most important aspects of any country. It is our duty to equip soldier with better advanced technology. In this proposed system, we are monitoring the soldier’s health parameters such as heart beat rate and body temperature continuously measured and transmitted wirelessly to the control room using GSM and also the exact location through GPS.
    Here we are using voltage regulator circuit for power supply, Blood pressure & heartbeat sensor, MQ-7 sensor, temperature sensor, Wi-Fi module, GSM, GPS, buzzer and LCD display these are also the hardware parts of this projects. By using temperature sensor we can monitor the soldier’s body temperature. If smoke is detected due to fire air it is detected by using MQ-7 sensor. With the help of heartbeat & blood pressure sensor we can read the heartbeat & B.P respectively.

    Select options
  • 4.50 out of 5

    HEALTH MONITORING OF PATIENT OVER IOT

    18,700.00 14,000.00

    In this proposed system, we are monitoring the patient’s health by using arduino board & sensors. Here we are using adapter for power supply even you can use 2 amp transformer. Blood pressure & heartbeat sensor, MQ-7 sensor, temperature sensor, Wi-Fi module, buzzer and LCD display these are also the hardware parts of this projects. By using temperature sensor we can monitor the patient’s temperature. For monitoring the air quality of the room we are using MQ-7 sensor. With the help of heartbeat & blood pressure sensor we can read the heartbeat & B.P respectively.

    Select options
  • 4.50 out of 5

    HEARTBEAT MONITORING SYSTEM OVER IOT

    8,500.00 6,000.00

    In this proposed system, we are monitoring the patient’s heartbeat by using arduino board & heartbeat sensors. A technological innovation in the field of medical science has played a vital role in disease prevention and diagnostic. Heartbeat is an important health parameter that is related to the human cardiovascular system.

    Select options
  • 4.75 out of 5

    HOME APPLIANCES CONTROL USING RF REMOTE

    6,800.00 5,800.00

    The main objective of this project is to develop a home automation system with RF controlled remote. As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving wireless controlled switches. Presently, conventional wall switches located in different parts of the house makes it difficult for the user to go near them to operate. Even more it becomes more difficult for the elderly or physically handicapped people to do so. Remote controlled home automation system provides a simpler solution with RF controller technology.

    Select options
  • 4.00 out of 5

    HOME SECURITY SYSTEM USING GSM

    6,800.00 5,800.00

    The main objective of the project is to develop a home security. Today it is very needful to secure the all banking departments. Also it will reduce the employer works and saves man power to operate the entire house monitoring.

    Select options
  • 5.00 out of 5

    INDOOR POLLUTION MONITORING & CONTROL SYSTEM

    9,500.00 8,000.00

    Air pollution is a growing issue these days. Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, dust, and pollen may be suspended as particles. Effect of air pollution has many bad things and the others may cause problems to our health, for instance, asthma, cough, and lung disorders. It is necessary to monitor air quality and keep it under control for a better future and healthy living for all. The sensors interact with Arduino UNO which processes this data and transmits it over internet.

    Select options

Select your currency
×