Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino

Code 590 Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino

5.00 out of 5
(1 customer review)

14,400.00 13,800.00

Ready-made Project

If You Are Short On Time
14,400.00 13,800.00
Add to cart - OR - See more options

This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.

Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today’s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.

There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.

Kits Price
For Simulation
4,000.00 3,000.00
Ready-made Project + DIY Project Kit
If You Are An Enthusiast
15,600.00 14,500.00
Ready-made Project
If You Are Short On Time
14,400.00 13,800.00
DIY Project Kit
For Institutions
13,000.00 12,400.00
For Documentation
4,000.00 3,000.00
For PCB
2,000.00 1,000.00

Description

This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.

Nowadays There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today’s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.

There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle..

 

HIGHLIGHTS

  • The purpose of the drowsiness detection system is to aid in the prevention of accidents in passenger and commercial vehicles.
  • The system will detect the early symptoms of drowsiness before the driver has fully lost all attentiveness and warn the driver that they are no longer capable of operating the vehicle safely.

BLOCK DIAGRAM

HARDWARE REQUIREMENTS

  • Voltage regulator
  • Arduino
  • Lcd display
  • Ultra sonic sensor
  • Eye blink sensor
  • Dc motors
  • L293d motor driver ic
  • Alcohol sensor
  • Smoke sensor
  • Temperature sensor
  • Accelerometer
  • Battery
  • Ir sensor
  • buzzer

SOFTWARE REQUIREMENTS

  • Arduino IDE
  • Eagle
  • protious

RESOURCES

Additional information

Kits

For Simulation, Ready-made Project + DIY Project Kit | If You Are An Enthusiast, Ready-made Project | If You Are Short On Time, DIY Project Kit | For Institutions, For Documentation, For PCB

1 review for Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino

  1. 5 out of 5

    Ankita Sutar

    It is best online service where we can purchase documentation. Thank for Electrosla team.

Add a review

Your email address will not be published. Required fields are marked *