SPEED CONTROL OF TWO INDUCTION MOTOR USING ACPWM

Electrical Projects

Showing 161–176 of 206 results

  • 4.67 out of 5

    SPEED CONTROL OF TWO INDUCTION MOTOR USING ACPWM

    10,500.00 8,600.00

    This project attempts a new speed control technique for the single-phase a.c.   induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c.   induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.

    Select options
  • 4.12 out of 5

    STREET LIGHT THAT GLOWS ON DETECTING VEHICLE MOVEMENT

    7,500.00 5,000.00

    This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.

    Select options
  • 4.40 out of 5

    SUBSTATION MONITORING OVER GSM WITH FLOOD AND EARTH QUICK DETECTION

    10,000.00 9,000.00
    Select options
  • 4.57 out of 5

    SUBSTATION MONITORING USING ARDUINO OVER GSM

    9,400.00 8,400.00
    Select options
  • 4.50 out of 5

    SUN TRACKING SOLAR PANEL

    7,500.00 5,000.00

    This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.

    Select options
  • 4.20 out of 5

    Sun Tracking Solar Panel

    13,000.00 12,000.00

    In this project, LDR’s are working as light detectors. Before we go into detail, we will have to understand how the LDR’s work. LDR (Light Dependent Resistor) also known as photo resistor is the light sensitive device. Its resistance decrease when the light falls on it and that’s why it is frequently used in Dark or Light Detector Circuit. Check the various circuits based on LDR here.

    Select options
  • 5.00 out of 5

    SUN TRACKING SOLAR PANEL TO TRACK THE MAXIMUM RAYS BY USING SERVO MOTOR

    9,500.00 7,400.00

    This project employs sun tracking solar panel to track the maximum rays by using servo motor. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.

    Select options
  • 4.00 out of 5

    SUN TRACKING SOLAR PANEL TO TRACK THE MAXIMUM RAYS USING LDR’S

    7,600.00 5,800.00

    This project employs sun tracking solar panel to track the maximum rays using ldr’s. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days. With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the maximum Sun rays.

    Select options
  • 4.00 out of 5

    SUN TRACKING SOLAR PANEL WITH STREET LIGHT CONTROL

    5,900.00 5,500.00

    This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.
    With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the Sun.

    Select options
  • 4.50 out of 5

    SUPER FAST ELECTRONIC CIRCUIT BREAKER

    7,500.00 5,000.00

    The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.

    Select options
  • 4.50 out of 5

    SUPER / ULTRA FAST ELECTRIC CIRCUIT BREAKER

    6,300.00 3,600.00

    The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.

    Select options
  • 4.20 out of 5

    Supply Selection Using Arduino

    13,300.00 12,200.00

    Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.

    Select options
  • 4.50 out of 5

    TACHOMETER USING 8051 MICROCONTROLLER

    6,800.00 5,700.00

    The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.

    Select options
  • 4.60 out of 5

    THREE PHASE TRANSMISSION LINE FAULT DETECTION

    10,800.00 9,800.00

    The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a “Fault”. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.

    Select options
  • 5.00 out of 5

    THREE PHASE TRANSMISSION LINE FAULT DETECTION OVER GSM

    11,800.00 10,800.00
    Select options
  • 4.67 out of 5

    Three Phase Transmission Line Fault Detection Over IOT

    12,700.00 11,700.00

    The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station

     

    Select options

Select your currency
×