Shopping cart is empty!
All Projects, Sensor Based Projects, Arduino Projects, Communication, Mechanical Projects, Solar Based Projects, Electronic Products
SUN TRACKING SOLAR PANEL
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
All Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Solar Based Projects, Electronic Products
Supply Selection Using Arduino
4.2 ★
4.2 ★
5 Ratings
5 ★
1
4 ★
4
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.
Highlights:
Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.
All Projects, IOT Projects, Sensor Based Projects, Communication, Mechanical Projects, Electronic Products, ESP 32
Temperature, humidity and dust measurement over IOT
4.4 ★
4.4 ★
5 Ratings
5 ★
2
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(5)
All Projects, Sensor Based Projects, DHT Sensor Based Projects, Arduino Projects, Electronic Products
The Humidity and Temperature Measurement System using Arduino
4.3 ★
4.3 ★
4 Ratings
5 ★
1
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
The project is designed to develop an automatic humidity and temperature measurement system that displays temperature . In enrolment, use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
Highlights:
The project is designed to develop an automatic humidity and temperature measurement system that displays temperature . In enrolment, use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
THIRD EYE FOR BLIND PERSON
4.4 ★
4.4 ★
5 Ratings
5 ★
2
4 ★
3
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
The third eye for the blind is advancement with the assistance of the multidiscipline subjects like software engineering, hardware designing which encourages the visually impaired individuals to explore with speed and certainty by recognizing the object and person close- by deterrents utilizing the assistance of ultrasonic waves and inform them with a beep sound and audio assistance.?? The influenced ones have been utilizing the convention
white stick for a long time which in spite of the fact that being powerful,?? still has a?? considerable measure of weakness.?? These will be wearable innovations for the
blinds.
Highlights:
The third eye for the blind is advancement with the assistance of the multidiscipline subjects like software engineering, hardware designing which encourages the visually impaired individuals to explore with speed and certainty by recognizing the object and person close- by deterrents utilizing the assistance of ultrasonic waves and inform them with a beep sound and audio assistance.?? The influenced ones have been utilizing the convention
white stick for a long time which in spite of the fact that being powerful,?? still has a?? considerable measure of weakness.?? These will be wearable innovations for the
blinds.
THIRD EYE FOR BLIND PERSON
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Electronic Products
THREE PHASE TRANSMISSION LINE FAULT DETECTION
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a ???Fault???. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.
Highlights:
The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a ???Fault???. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.
All Projects, Sensor Based Projects, Arduino Projects, Communication, Electrical Projects, GSM Based Projects, Electronic Products
THREE PHASE TRANSMISSION LINE FAULT DETECTION OVER GSM
5 ★
5 ★
1 Rating
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(1)
All Projects, IOT Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Electronic Products
Three Phase Transmission Line Fault Detection Over IOT
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station
Highlights:
The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station
All Projects, Sensor Based Projects, Core Electronics Projects, Electrical Projects, Electronic Products
Touch Sensor Base Dimmer
4.7 ★
4.7 ★
3 Ratings
5 ★
2
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A Arduino is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.
Highlights:
Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A Arduino is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.
All Projects, IOT Projects, Automation Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, Electrical Projects, Temprature Based Projects, Ultrasonic Based Projects, Electronic Products, RFID Based Projects
TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO
4.8 ★
4.8 ★
5 Ratings
5 ★
4
4 ★
1
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.
Highlights:
The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.
All Projects, Sensor Based Projects, IR Based Projects, Embedded Projects, Micro Controller, Electronic Products
TRAFFIC DENSITY SENSED SIGNAL LIGHT SYSTEM
5 ★
5 ★
3 Ratings
5 ★
3
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The main goal of this project is to control the traffic density at the junction by IR sensor that detects the traffic density at the junction and changes the signal timings automatically by IR interruption method.
Highlights:
The main goal of this project is to control the traffic density at the junction by IR sensor that detects the traffic density at the junction and changes the signal timings automatically by IR interruption method.