Showing 17–32 of 167 results
-
Anti sleep alarm for drivers and vehicle control
₹6,800.00₹5,800.00This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed a eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of eye. On this device the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when eye blink sensor receives a signal from the transmission module.
-
ARDUINO BASED TACHOMETER
₹6,200.00₹4,300.00The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
-
AUTOMATED ALCOHOL DETECTION AND ACCIDENT DETECTION VEHICLE
₹13,500.00₹12,200.00This tracking system generally use Global Positioning System or GPS Technology to locate each vehicle through SMS to the user number. Also the fuel level in the vehicle is also displayed on LCD. And the fuel level condition is send to android phone through GSM module. Vehicle Tracking application can be immensely useful for large and populated cities.
-
AUTOMATIC CLOTH DRYING SYSTEM USING PIC CONTROLLER OVER IOT
₹8,500.00₹7,200.00Drying of clothes in rainy season have become a domestic concern in recent years .In this proposed system we are continuously monitoring the area where we dry out our clothes especially when it’s raining and upload the data over IOT.
-
AUTOMATIC IRRIGATION SYSTEM ON SENSING SOIL MOISTURE CONTENT
₹5,200.00₹3,500.00The project is designed to develop an automatic irrigation system that switches a pump motor on or off upon sensing the moisture content of the soil. In the field of agriculture, use of proper method of irrigation is important. The advantage of using this method is to reduce human intervention and still ensure proper irrigation.
-
Automatic Solar Pannel Cleaning By Sensing Solar Voltage And Light Luminance
₹11,000.00₹9,400.00The solar PV modules are generally employed in dusty environments. The dust gets accumulated on the front surface of the module and blocks the incident light from the sun. It reduces the power generation capacity of the module. The power output reduces as much as by 50% if the module is not cleaned for a month.
-
Automatic Street Light Intensity Control Based On The IR Sensor Using Arduino
₹9,000.00₹7,800.00Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
-
Autonomous Fire Fighting Robot Using Arduino
₹15,500.00₹14,000.00A fire outbreak is a hazardous activity that leads to numerous consequences. Detecting a fire at an early stage and extinguishing it can aid in the prevention of various accidents. Till now we rely on human resources. This often leads to risking the life of that person. Therefore, fire security becomes an important aspect to save human lives. In this, a fire extinguishing robot has been proposed and designed which detects the fire location and extinguishes the fire by using sprinklers on triggering the pump. This robot uses flame sensors for accurate fire detection. This proposed model of Fire Extinguishing Robot using Arduino is used to detect the presence of fire and extinguish it automatically without any human interference. It contains gear motors and motor drivers to control the movement of the robot when it detects any presence of fire and will automatically start the water pump to extinguish that fire breakout. This model robot has a water ejector which is capable of ejecting water at the fire breakout place. The water ejector pipe can be moved in the required direction using a servo motor. The whole operation is controlled by an Arduino UNO.
Fire-fighting is an important but dangerous occupation. A firefighter must be able to reach the situation quickly and safely extinguish the fire, preventing further damage and reducing fatalities. Technology has come to rescue this issue, fire-fighters and machines are now having more efficient and effective methods of fire fighting. This gives you the design idea of a fire-fighting robot using autonomous operation. The robotic vehicle is loaded with a fire extinguisher and a water pump which is controlled over the solenoid valve to throw water. An Arduino UNO is used for the desired operation. A water tank and fire extinguisher set up along with a water pump are mounted on the robot body and its operation is carried out from the output through the appropriate signal from the sensor. The whole operation is controlled by an Arduino UNO.