Autonomous Fire Fighting Robot Using Arduino

Code 584 Autonomous Fire Fighting Robot Using Arduino

4.80 out of 5
(5 customer reviews)

$186.31 $168.28

Ready-made Project

If You Are Short On Time
$186.31 $168.28
Add to cart - OR - See more options

A fire outbreak is a hazardous activity that leads to numerous consequences. Detecting a fire at an early stage and extinguishing it can aid in the prevention of various accidents. Till now we rely on human resources. This often leads to risking the life of that person. Therefore, fire security becomes an important aspect to save human lives. In this, a fire extinguishing robot has been proposed and designed which detects the fire location and extinguishes the fire by using sprinklers on triggering the pump. This robot uses flame sensors for accurate fire detection. This proposed model of Fire Extinguishing Robot using Arduino is used to detect the presence of fire and extinguish it automatically without any human interference. It contains gear motors and motor drivers to control the movement of the robot when it detects any presence of fire and will automatically start the water pump to extinguish that fire breakout. This model robot has a water ejector which is capable of ejecting water at the fire breakout place. The water ejector pipe can be moved in the required direction using a servo motor. The whole operation is controlled by an Arduino UNO.

 

Fire-fighting is an important but dangerous occupation. A firefighter must be able to reach the situation quickly and safely extinguish the fire, preventing further damage and reducing fatalities. Technology has come to rescue this issue, fire-fighters and machines are now having more efficient and effective methods of fire fighting. This gives you the design idea of a fire-fighting robot using autonomous operation. The robotic vehicle is loaded with a fire extinguisher and a water pump which is controlled over the solenoid valve to throw water. An Arduino UNO is used for the desired operation. A water tank and fire extinguisher set up along with a water pump are mounted on the robot body and its operation is carried out from the output through the appropriate signal from the sensor. The whole operation is controlled by an Arduino UNO.

 

Kits DescriptionPrice
Ready-made Project + DIY Project Kit
If You Are An Enthusiast
Ready-made project kit, One more extra bare PCB solderable components for extra PCB, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, and One year warranty. $192.32 $180.30
Ready-made Project
If You Are Short On Time
Ready-made project kit - All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, One year warranty. $186.31 $168.28
DIY Project Kit
For Institutions
DIY KIT - Bare PCB, solderable components, external all components, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, $168.28 $156.26
For Documentation
(Report, PPT, Circuit diagram, Program code, Explanatory Video). Audiocall support. $36.06 $24.04
For Simulation
Proteus Simulation file, Program Coad, Hex File, Explanatory Video, Google Meet Or Zoom Meet Support. $48.08 $36.06

Description

A fire outbreak is a hazardous activity that leads to numerous consequences. Detecting a fire at an early stage and extinguishing it can aid in the prevention of various accidents. Till now we rely on human resources. This often leads to risking the life of that person. Therefore, fire security becomes an important aspect to save human lives. In this, a fire extinguishing robot has been proposed and designed which detects the fire location and extinguishes the fire by using sprinklers on triggering the pump. This robot uses flame sensors for accurate fire detection. This proposed model of Fire Extinguishing Robot using Arduino is used to detect the presence of fire and extinguish it automatically without any human interference. It contains gear motors and motor drivers to control the movement of the robot when it detects any presence of fire and will automatically start the water pump to extinguish that fire breakout. This model robot has a water ejector which is capable of ejecting water at the fire breakout place. The water ejector pipe can be moved in the required direction using a servo motor. The whole operation is controlled by an Arduino UNO.

 

Fire-fighting is an important but dangerous occupation. A firefighter must be able to reach the situation quickly and safely extinguish the fire, preventing further damage and reducing fatalities. Technology has come to rescue this issue, fire-fighters and machines are now having more efficient and effective methods of fire fighting. This gives you the design idea of a fire-fighting robot using autonomous operation. The robotic vehicle is loaded with a fire extinguisher and a water pump which is controlled over a solenoid valve to throw water. An Arduino UNO is used for the desired operation. A water tank and fire extinguisher set up along with a water pump are mounted on the robot body and its operation is carried out from the output through an appropriate signal from the sensor. The whole operation is controlled by an Arduino UNO.

 

NOTE =Autonomous firefighting robot using arduino is the project of last year’s engineering projects, BE final year engineering project. This project is used for the BE last year’s core electronics department students. This project is used for the electrical department students. This project isused for the core electrical department students.

Autonomous firefighting robot using arduino is the project of a good price for the engineering projects. It is a very comparative engineering project. It is a very good BE final year project. It is a project forarduino based project. This project is sensors based project.This project is robotics based projects. This projects is ultrasonic and flame sensor based project.

The engineering projects give in the ELECTROSAL HI- TECH PVT.LTD. The best place for the degree final year engineering projects as well as for core electronics students’ and electrical and final year for the golden opportunity.

Autonomous firefighting robot using arduinois an easy project and idea for the core electronics and electrical base students and 100% output is done.

HIGHLIGHTS

  • Designed to build an ultrasonic obstacle sensing robotic vehicle using an ultrasonic sensor
  • The robot is generally computational intelligence that involves programmed instruction and physical machines

BLOCK DIAGRAM

HARDWARE REQUIREMENTS

  • ARDUINO
  • VOLTAGE REGULATOR
  • L293D MOTOR DRIVER IC
  • DC MOTOR
  • ULTRASONIC SENSOR
  • SERVO MOTOR
  • WATER PUMP
  • BATTERY
  • SPRAY

SOFTWARE REQUIREMENTS

  • Arduino
  • Eagle

 

RESOURCES

Additional information

Weight4.14 kg
Dimensions30 x 30 x 23 cm
Kits

For Simulation, Ready-made Project + DIY Project Kit | If You Are An Enthusiast, Ready-made Project | If You Are Short On Time, DIY Project Kit | For Institutions, For Documentation, For PCB

5 reviews for Autonomous Fire Fighting Robot Using Arduino

  1. 5 out of 5

    priti mane

    good

  2. 5 out of 5

    rama mane

    good

  3. 5 out of 5

    Anuja mane

    good

  4. 5 out of 5

    electrosal

    very nice

  5. 4 out of 5

    Sachin Kulkarni

    Good experience… Highly skilled employees

Add a review

Your email address will not be published. Required fields are marked *