Ready-made project kit, One more extra bare PCB solderable components for extra PCB, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, and One year warranty.
₹7,500.00₹10,000.00
Ready-made Project
If You Are Short On Time
Ready-made project kit - All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, One year warranty.
₹6,000.00₹8,800.00
DIY Project Kit
For Institutions
DIY KIT - Bare PCB, solderable components, external all components, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support,
₹5,000.00₹7,200.00
For Documentation
(Report, PPT, Circuit diagram, Program code, Explanatory Video). Audio and video call support.
₹2,000.00₹3,000.00
For Simulation
Proteus Simulation file, Program Coad, Hex File, Explanatory Video, Google Meet Or Zoom Meet Support
The concept of electronic energy meters has been introduced in the power sector to effectively record the units consumed for billing purposes and also monitor several other factors to reduce power theft and minimize losses that occurs due to conventional electromechanical energy meters. This is a multipurpose project that integrates all the functions including a prepaid billing arrangement and automatic message sending system to the utility company.It may please be noted that it is truly not ausable commercial product engaging actual prepaid card but uses a set of switches for understanding the technology implemented behind it.
The main objective of this project is to provide uninterrupted power supply to a load, by selecting the supply source automatically from any available one out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problem in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.
This project is designed to control home appliances based on a fixed-time delay for each load by using a 555 timer to generate switching period intervals to drive a relay to switch ON or OFF for any load.
The objective of this project is to determine the distance of underground cable fault from base station in kilometers USING a PIC microcontroller . The underground cable system is a common practice followed in many urban areas. While a fault occurs for some reason, at that time the repairing process related to that particular cable is difficult due to not knowing the exact location of the cable fault. The proposed system is to find the exact location of the fault.
The main goal of this project is to control the traffic density at the junction by IR sensor that detects the traffic density at the junction and changes the signal timings automatically by IR interruption method.
The main objective of this project is to develop a hotel management automation system using an microcontroller board with zigbee being controlled by switches . As technology is advancing so hotels are also getting smarter.
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using TRIAC.
The objective of this project is to determine the distance of underground cable fault from base station in kilometers USING AN Arduino board. The underground cable system is a common practice followed in many urban areas. While a fault occurs for some reason, at that time the repairing process related to that particular cable is difficult due to not knowing the exact location of the cable fault. The proposed system is to find the exact location of the fault.
The main objective of this project is to develop Coin based mobile charging by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.
Generally, in security systems, PIR sensor is used, but these methods are costly. This project explains about IR transmitter and receiver based security system instead of PIR.
The project is designed to control the speed of a DC motor using an 8051 series microcontroller. The speed of DC motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied.
The project is designed to develop an automatic water flow measurement system that displays flow rate. use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
The project is designed to develop a robotic vehicle that follows a specific path. This project uses an Arduino development Board. A pair of photo sensors comprising IR transmitter and photo diode is interfaced to the Arduino to detect a specified path for its movement.
The project is designed to develop an automatic humidity and temperature measurement system that displays temperature . In enrolment, use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
Get access to your Orders, Wishlist and Recommendations.
Signup
Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.
Kamalesh –
Nice project from Electrosal hi tech pvt Ltd
Anita lohar –
Good