Shopping cart is empty!
All Projects, Rain Sensor Based Projects, LDR Sensor Based Projects, Sensor Based Projects, Thermistor Sensor Based Projects, Soil Moisture Sensor Based Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Temprature Based Projects, School project
ADVANCE GREEN HOUSE WITHOUT MICROCONTROLLER
4 ★
4 ★
2 Ratings
5 ★
1
4 ★
0
3 ★
1
2 ★
0
1 ★
0
(2)
Highlights:
This project is designed to monitor the green house using Comparator IC. Various sensors are used to monitor the system. The sensors used are Rain sensor, Soil moisture sensor, LDR, wired security sensor, water level indicator, IR sensor. When the soil of the green house becomes dry the pump will turn on through which the water is let into the soil and the soil regains its moisture. While supplying the water to the dry soil the water level in tank will be reducing simultaneously which will be indicated by the LED???s.
So when the water level reduces below the threshold level the pump will off automatically to avoid dry run.
Highlights:
This project is designed to monitor the green house using Comparator IC. Various sensors are used to monitor the system. The sensors used are Rain sensor, Soil moisture sensor, LDR, wired security sensor, water level indicator, IR sensor. When the soil of the green house becomes dry the pump will turn on through which the water is let into the soil and the soil regains its moisture. While supplying the water to the dry soil the water level in tank will be reducing simultaneously which will be indicated by the LED???s.
So when the water level reduces below the threshold level the pump will off automatically to avoid dry run.
ARDUINO BASED TACHOMETER
5 ★
5 ★
2 Ratings
5 ★
2
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
Highlights:
The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
All Projects, Automation Projects, IR Based Projects, Mechanical Projects, Embedded Projects, Micro Controller, Electronic Products
AUTOMATIC CONVEYER BELT FOR WATER FILLING
4.2 ★
4.2 ★
10 Ratings
5 ★
3
4 ★
6
3 ★
1
2 ★
0
1 ★
0
(10)
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
Highlights:
The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
All Projects, Sensor Based Projects, Arduino Projects, Core Electronics Projects, IR Based Projects, Electronic Products
Automatic Street Light Intensity Control Based On The IR Sensor Using Arduino
4.6 ★
4.6 ★
5 Ratings
5 ★
3
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(5)
Highlights:
Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
Highlights:
Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
COIN BASE MOBILE CHARGER
4 ★
4 ★
4 Ratings
5 ★
1
4 ★
2
3 ★
1
2 ★
0
1 ★
0
(4)
Highlights:
The main objective of this project is to develop Coin based mobile charging by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.
Highlights:
The main objective of this project is to develop Coin based mobile charging by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.
All Projects, Automation Projects, Sensor Based Projects, IR Based Projects, Electrical Projects, Embedded Projects, Micro Controller
COIN BASE WATER FILLING
4 ★
4 ★
4 Ratings
5 ★
0
4 ★
4
3 ★
0
2 ★
0
1 ★
0
(4)
Highlights:
The main objective of this project is to develop Coin based water filling by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the motor is automatically ON for particular time.
Highlights:
The main objective of this project is to develop Coin based water filling by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the motor is automatically ON for particular time.
All Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Core Electrical Projects, Mini Project, School project
COIN BASED MOBILE CHARGER
4.5 ★
4.5 ★
15 Ratings
5 ★
7
4 ★
8
3 ★
0
2 ★
0
1 ★
0
(15)
Highlights:
The main objective of this project is to develop Coin based mobile charger by using a Timer IC along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.
Highlights:
The main objective of this project is to develop Coin based mobile charger by using a Timer IC along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.
All Projects, IR Based Projects, Embedded Projects, Mini Project, School project, Robotics Based Projects, Mechatronics
EDGE AVOIDANCE ROBOT BY ARDUINO
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
Highlights:
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
FACE DETECTION BASED LOCKING SYSTEM USING RASPBERRY PI CAMERA FOR HIGH ALERT SECURITY
5 ★
5 ★
2 Ratings
5 ★
2
4 ★
0
3 ★
0
2 ★
0
1 ★
0
(2)
Highlights:
The project deals with the design and implementation of secure locking automation using Raspberry Pi Bio-metrics refers to metrics related to human characteristics. Face recognition system is widely used for human identification due to its capability to measure and subsequently identifies human identification especially for security purposes. Bio-metrics authentication (or realistic authentication) is used in computer science as a form of identification and access control. It is also used to identify individuals in groups that are under surveillance. Open CV/ Python library is formulated as given images of a scene identify or verify one or more persons in the scene using a stored database of faces. Thus, the images are extracted and allowed to match with the database images. If the images are matched, the door opens automatically.
Highlights:
The project deals with the design and implementation of secure locking automation using Raspberry Pi Bio-metrics refers to metrics related to human characteristics. Face recognition system is widely used for human identification due to its capability to measure and subsequently identifies human identification especially for security purposes. Bio-metrics authentication (or realistic authentication) is used in computer science as a form of identification and access control. It is also used to identify individuals in groups that are under surveillance. Open CV/ Python library is formulated as given images of a scene identify or verify one or more persons in the scene using a stored database of faces. Thus, the images are extracted and allowed to match with the database images. If the images are matched, the door opens automatically.
INVISIBLE INFRARED SECURITY SYSTEM
4.3 ★
4.3 ★
3 Ratings
5 ★
1
4 ★
2
3 ★
0
2 ★
0
1 ★
0
(3)
Highlights:
Generally, in security systems, PIR sensor is used, but these methods are costly. This project explains about IR transmitter and receiver based security system instead of PIR.
Highlights:
Generally, in security systems, PIR sensor is used, but these methods are costly. This project explains about IR transmitter and receiver based security system instead of PIR.
All Projects, IOT Projects, Automation Projects, LDR Sensor Based Projects, DHT Sensor Based Projects, Arduino Projects, IR Based Projects, Core Electronics Projects, Electrical Projects, Temprature Based Projects, Electronic Products
IOT BASED HOME AUTOMATION USING BLYNK
4.2 ★
4.2 ★
5 Ratings
5 ★
2
4 ★
2
3 ★
1
2 ★
0
1 ★
0
(5)
All Projects, Sensor Based Projects, Arduino Projects, IR Based Projects, Electrical Projects, Robotics Based Projects, Electronic Products, Mechatronics
LINE FOLLOWING ROBOT USING ARDUINO
4.5 ★
4.5 ★
11 Ratings
5 ★
5
4 ★
6
3 ★
0
2 ★
0
1 ★
0
(11)
Highlights:
The project is designed to develop a robotic vehicle that follows a specific path. This project uses an Arduino development Board. A pair of photo sensors comprising IR transmitter and photo diode is interfaced to the Arduino to detect a specified path for its movement.
Highlights:
The project is designed to develop a robotic vehicle that follows a specific path. This project uses an Arduino development Board. A pair of photo sensors comprising IR transmitter and photo diode is interfaced to the Arduino to detect a specified path for its movement.