Ready-made project kit, One more extra bare PCB solderable components for extra PCB, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, and One year warranty.
$90.15$120.20
Ready-made Project
If You Are Short On Time
Ready-made project kit - All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support, One year warranty.
$72.12$105.78
DIY Project Kit
For Institutions
DIY KIT - Bare PCB, solderable components, external all components, All documentation (Report, PPT, Circuit diagram, Program code, explanatory video ), Audio and video call support,
$60.10$86.54
For Documentation
(Report, PPT, Circuit diagram, Program code, Explanatory Video). Audio and video call support.
$24.04$36.06
For Simulation
Proteus Simulation file, Program Coad, Hex File, Explanatory Video, Google Meet Or Zoom Meet Support
This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.
The project is designed to develop a density- based parking allotment system. This system indicates no entry to a vehicle to park when the parking area is fully occupied. Parking congestion is a severe problem in many major cities across the world and it has become a nightmare for the commuters in these cities.
This project is designed to control home appliances based on a fixed-time delay for each load by using a 555 timer to generate switching period intervals to drive a relay to switch ON or OFF for any load.
The main objective of this project is to develop a home automation system with Android application controlled remote.The microcontroller used here is of 8051 family. The loads are interfaced to the microcontroller using Opto-isolators and TRIAC???s.
The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
The concept of electronic energy meters has been introduced in the power sector to effectively record the units consumed for billing purposes and also monitor several other factors to reduce power theft and minimize losses that occurs due to conventional electromechanical energy meters. This is a multipurpose project that integrates all the functions including a prepaid billing arrangement and automatic message sending system to the utility company.It may please be noted that it is truly not ausable commercial product engaging actual prepaid card but uses a set of switches for understanding the technology implemented behind it.
The main intention of this project is to control the speed of a DC motor in alternative directions using speed control unit and to operate the motor in four quadrants: ie, clockwise, counter clock-wise, forward brake and reverse brake
The main intention of this project is to develop an induction motor speed control system which is helpful to control the speed of an induction motor using TRIAC.
This Advance project is designed to monitor the green house using Arduino controller. Various sensors are used to monitor the system. The sensors used are Rain sensor, Soil moisture sensor, DHT 11 sensor, fire detector and LDR. GSM is used to send parameters status to the respective person on cellular phone. Respective person will take action on parameters status through cellular phone.
The main goal of this project is to control the traffic density at the junction by IR sensor that detects the traffic density at the junction and changes the signal timings automatically by IR interruption method.
The project is designed to control the speed of a DC motor using an 8051 series microcontroller. The speed of DC motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied.
Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A microcontroller of 8051 family is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.
The project is designed to develop an automatic water flow measurement system that displays flow rate. use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
The project is designed to develop a robotic vehicle that follows a specific path. This project uses an Arduino development Board. A pair of photo sensors comprising IR transmitter and photo diode is interfaced to the Arduino to detect a specified path for its movement.
The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.
The project is designed to develop an automatic humidity and temperature measurement system that displays temperature . In enrolment, use of proper method of measurement is important. The advantage of using this method is to reduce human intervention.
Get access to your Orders, Wishlist and Recommendations.
Signup
Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.
Kamalesh –
Nice project from Electrosal hi tech pvt Ltd
Anita lohar –
Good