ADVANCE GREEN HOUSE WITHOUT MICROCONTROLLER

IR

Showing 1–16 of 17 results

  • 0 out of 5

    ADVANCE GREEN HOUSE WITHOUT MICROCONTROLLER

    7,100.00 5,800.00

    This project is designed to monitor the green house using Comparator IC. Various sensors are used to monitor the system. The sensors used are Rain sensor, Soil moisture sensor, LDR, wired security sensor, water level indicator, IR sensor. When the soil of the green house becomes dry the pump will turn on through which the water is let into the soil and the soil regains its moisture. While supplying the water to the dry soil the water level in tank will be reducing simultaneously which will be indicated by the LED’s.
    So when the water level reduces below the threshold level the pump will off automatically to avoid dry run.

    Select options
  • 0 out of 5

    ARDUINO BASED TACHOMETER

    6,200.00 4,300.00

    The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.

    Select options
  • 0 out of 5

    AUTOMATIC CONVEYER BELT FOR WATER FILLING

    12,300.00 9,800.00

    The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.

    Select options
  • 3.00 out of 5

    COIN BASE MOBILE CHARGER

    5,900.00 4,900.00

    The main objective of this project is to develop Coin based mobile charging by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.

    Select options
  • 0 out of 5

    COIN BASE WATER FILLING

    6,200.00 5,000.00

    The main objective of this project is to develop Coin based water filling by using a microcontroller along with circuits of IR sensor which we putting the coin inside it and relay of the motor is automatically ON for particular time.

    Select options
  • 0 out of 5

    COIN BASED MOBILE CHARGER

    6,000.00 3,800.00

    The main objective of this project is to develop Coin based mobile charger by using a Timer IC along with circuits of IR sensor which we putting the coin inside it and relay of the charger is automatically ON for particular time.

    Select options
  • 0 out of 5

    EDGE AVOIDANCE ROBOT BY ARDUINO

    5,000.00 4,000.00

    The project is designed to build an obstacle avoiding robotic vehicle using IR sensors for robotic movement. An Arduino development is used to achieve the desired operation.

    Select options
  • 0 out of 5

    FACE DETECTION BASED LOCKING SYSTEM USING RASPBERRY PI CAMERA FOR HIGH ALERT SECURITY

    15,700.00 12,900.00

    The project deals with the design and implementation of secure locking automation using Raspberry Pi Bio-metrics refers to metrics related to human characteristics. Face recognition system is widely used for human identification due to its capability to measure and subsequently identifies human identification especially for security purposes. Bio-metrics authentication (or realistic authentication) is used in computer science as a form of identification and access control. It is also used to identify individuals in groups that are under surveillance. Open CV/ Python library is formulated as given images of a scene identify or verify one or more persons in the scene using a stored database of faces. Thus, the images are extracted and allowed to match with the database images. If the images are matched, the door opens automatically.

    Select options
  • 0 out of 5

    INVISIBLE INFRARED SECURITY SYSTEM

    1,050.00 970.00

    Generally, in security systems, PIR sensor is used, but these methods are costly. This project explains about IR transmitter and receiver based security system instead of PIR.

    Select options
    Browse Wishlist
  • 0 out of 5

    LINE FOLLOWING ROBOT USING ARDUINO

    6,200.00 4,800.00

    The project is designed to develop a robotic vehicle that follows a specific path. This project uses an Arduino development Board. A pair of photo sensors comprising IR transmitter and photo diode is interfaced to the Arduino to detect a specified path for its movement.

    Select options
  • 0 out of 5

    LINE FOLLOWING ROBOTIC VEHICLE

    5,100.00 3,500.00

    The project is designed to develop a robotic vehicle that follows a specific path. This project doesn’t require a microcontroller for its operation. A pair of photo sensors comprising IR transmitter and photo diode is used to detect the specified path for its movement.

    Select options
  • 0 out of 5

    OPTIMUM ENERGY MANAGEMENT BASED ON COUNTER, LIGHT INTENSITY & TEMPERATURE SENSOR

    6,500.00 5,100.00

    The project is designed for optimum energy management based on counter, light intensity and temperature sensor. The system also counts the number of persons entering and leaving the room and displays that information on LCD display. Depending on person’s entry as well as exiting condition the room appliances will play their role. The ultimate objective of this system is to save the energy as well as to design automatic room light controller by turning off all the appliances when nobody is there in the home.

    Select options
  • 3.00 out of 5

    OPTIMUM ENERGY MANAGEMENT SYSTEM

    6,200.00 4,200.00

    The project is designed to monitor the number of persons entering as well as exiting a room. Electrical loads are switched ON as the first person enters and switches OFF when the last person leaves. IR sensors used in combination with microcontroller to monitor all the operations. This helps in saving lot of energy.

    Select options
  • 4.33 out of 5

    SPEED CHECKER TO DETECT RASH DRIVING ON HIGHWAYS

    5,400.00 4,000.00

    The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.

    Select options
  • 0 out of 5

    STREET LIGHT THAT GLOWS ON DETECTING VEHICLE MOVEMENT

    7,200.00 4,200.00

    This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.

    Select options
  • 0 out of 5

    TACHOMETER USING 8051 MICROCONTROLLER

    6,200.00 4,300.00

    The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.

    Select options

Select your currency